Food processing plant exterior (illustrative image, not a specific local site)
Saint-Laurent, Montréal

Hummus Filling Machine for Dip Makers in Saint-Laurent, Montréal

A fully automatic rotary filler and sealer for hummus, toum, labneh and baba ganoush makers in one of Montréal's largest employment hubs: ±0.5% fills from 50 g to 500 g, up to 30 cups per minute, built in Calgary and delivered in 8–12 weeks.

The Short Answer

A hummus filling machine for producers in Montréal's Saint-Laurent borough portions dip into pre-formed cups and heat-seals them in one pass. Hummus Pack's SDH-R does this on a rotary turret, dosing 50–500 g at ±0.5% at 18–25 cups per minute in production (30 on a dry cycle). Made in Calgary, it reaches Québec as a domestic shipment with no import duties, priced from $45,000 USD for one filler.

SDH-R key facts
Machine
SDH-R automatic rotary cup filler, sealer and lidder
Production rate
18–25 cups/min real-world; 30 cups/min dry cycle
Fill range and accuracy
50–500 g (about 2–17 oz) at ±0.5%
Fillers per pass
Up to 3 (base, drizzle, garnish)
Optional MAP
Residual oxygen 0.3–0.4%; shelf life roughly 7–10 days to 30–45+ days (product-dependent)
Delivery and warranty
8–12 weeks from order confirmation; 12 months
Support for Québec
Calgary HQ and Alberta service centre (no Québec service centre)

Hummus filling machine for Montréal's Saint-Laurent borough

If you make dips in Saint-Laurent, you are shopping for a hummus filling machine in one of the largest employment hubs on the island of Montréal. The City of Montréal calls the borough the second-largest employment centre in the metropolitan region after downtown, with roughly 108,000 workers and 4,500 companies and commercial establishments. We build the SDH-R for the growing plants that fit into a Saint-Laurent industrial unit: a rotary cup filler that doses, seals and lids fresh dips in one pass.

Its frame occupies 44 × 52 in and stands 65.6 in tall, so it usually fits beside an existing kettle. The servo-driven piston doses at ±0.5%, roughly ±1.1 g on a 227 g (8 oz) hummus fill. See the SDH-R product page and our hummus filling machine overview.

Built in Calgary: no import duties, delivery 8–12 weeks after order confirmation and a 12-month warranty.

Saint-Laurent as a base for a food packaging machine in Montréal

According to the City of Montréal, about 70% of Saint-Laurent's 43 km² is devoted to industrial and commercial activity. Tour units with a checklist: a loading dock, drains for wet sanitation and room for cold storage.

The borough also holds Technoparc Montréal's Campus Saint-Laurent, which the city calls Canada's largest technology park, with more than 100 companies in aeronautics, pharmaceuticals and clean energy. It is not a food cluster, so expect aerospace and pharmaceutical neighbours.

Location is the real advantage. The city places the Technoparc sector at the intersection of Autoroutes 40 and 13, just north of the runways of Montréal-Trudeau International Airport, and Autoroute 520, a route airport-bound drivers use, crosses over Autoroute 13. Farther east, the Hodge-Lebeau sector, which the city describes as mostly large warehouses and industrial plants with more than 150 businesses, is enclosed by Autoroutes 40 and 15 and the CN rail line and has been served by the Côte-de-Liesse REM station since November 2025. Most chilled cups leave by truck, so Autoroute 40 access matters most.

Fitting an SDH-R into a Saint-Laurent industrial unit

Site questionWhat to plan for
Floor space44 × 52 in footprint plus access for cup and film loading, the conveyor and strip-down.
Doors and height65.6 in tall; walk the path from dock to production room first.
Compressed airNeeded for the pneumatic cup denester.
NitrogenOnly with the optional MAP flush.
Sanitation304 stainless steel, CIP and tool-free strip-down; plan drains and a parts wash station.
Cold chainChill product before filling; move sealed cups straight to a cold room.

Little Beirut: the Saint-Laurent market for hummus and Levantine dips

The City of Montréal notes that the borough's Chameran sector became a welcoming place for new immigrants, mainly from Lebanon, from the 1980s onward, earning it the nickname Little Beirut. In the 2021 Census of Population, as tabulated by the City's Montréal en statistiques office:

  • Arabic was the language spoken most often at home by 10,090 Saint-Laurent residents, or 9.9% of the borough, against 3.0% across the City of Montréal.
  • 4,825 of the borough's immigrants were born in Lebanon, more than a quarter of the city's 17,455 Lebanese-born immigrants.
  • Syria (4,685) and Morocco (3,965) are also among the leading birthplaces of Saint-Laurent's immigrants.
  • Immigrants made up 51.6% of the borough's population.

For a producer, that community is both a customer base and a demanding test panel. Shoppers who grew up with homemade hummus, toum and labneh notice texture, garlic strength and oil quality at once, so the filler must protect the product rather than flatten it. North American hummus demand is estimated at about $2.68 billion in 2026 and projected to reach about $3.67 billion by 2032, so a recipe that sells in Saint-Laurent can soon outgrow hand filling and justify a hummus filling machine.

Dip filling machine Québec producers can run: toum, labneh and baba ganoush

Each Levantine dip behaves differently in a filler:

Levantine dips on the SDH-R

ProductLine behaviourSetup to discuss
HummusDense paste that traps air; the oil topping must stay off the cup wall.Piston base fill, peristaltic pump for oil, garnish filler for chickpeas, vibration filler for sumac or paprika.
Toum (garlic sauce)Whipped garlic and oil emulsion; density varies batch to batch.Piston plus the optional weight checker feedback loop; suck-back nozzle.
LabnehStrained yogurt that can weep whey if overworked or warm.Fill cold; viscosity at fill temperature confirmed before quoting.
Baba ganoushEggplant fibres and seeds.Large-bore valving and a cut-off nozzle.
Muhammara-style dipsCoarse walnut pieces, a tree nut allergen.Wide-bore valving and an allergen changeover plan.

Two faults cause most rejects. A drip of oil or a thread of toum on the cup lip stops the film bonding, and the leak appears days later in a grocer's fridge; seal temperature, pressure and dwell cannot rescue a dirty flange, so nozzle choice comes first. And because a piston doses volume, a toum batch whipped lighter leaves underweight unless a checkweigher corrects the stroke. See garlic sauce and aioli filling, labneh and tahini filling and the baba ganoush filling machine.

Get a configured SDH-R quote for your productSend your product, cup size and target cups per minute — we reply within 24 hours.

Request a quote

Hummus packaging machine Québec rules: MAPAQ permits and CFIA licensing

In Québec, food permits are issued by the ministère de l'Agriculture, des Pêcheries et de l'Alimentation (MAPAQ). Its food permit pages are organized by activity, and its online identification tool shows which situations require a permit, the exemptions and the costs. Run your exact activity through it before signing a lease.

  • Dairy-based dips. A dairy plant permit (permis d'usine laitière) is required to process raw milk or dairy products, yogurt making included, and its category 3 covers packaging cheese, butter or other dairy products. Labneh makers should start here.
  • Plant-based dips. For hummus, toum or baba ganoush sold wholesale, confirm in the tool which permit, if any, applies.
  • Selling outside Québec. The CFIA requires a Safe Food for Canadians licence to manufacture, process, package or label food for export or interprovincial trade. Food made and sold only in Québec generally needs no federal licence, but SFCR rules such as preventive controls and labelling can still apply.
  • Label oversight. MAPAQ oversees foods produced and sold in Québec, the CFIA covers imported foods, and most labelling rules are federal.

Buying a hummus filling machine does not make a plant compliant. The SDH-R is designed to support a plant's HACCP-based preventive control plan: 304 stainless steel, CIP and tool-free strip-down make cleaning between a sesame recipe and a dairy recipe practical, and stored HMI recipes keep changeover under about 15 minutes. Sesame seeds, milk and tree nuts are all Health Canada priority allergens, so a line running hummus, labneh and a walnut dip needs validated cleaning and a sensible run order. The machine's CE, UL listed and FDA compliant food-contact status is set out on our certifications and compliance page.

French-first cup labels under the Charter of the French Language

The CFIA requires mandatory information on consumer prepackaged food in English and French, and notes that Québec has additional French-language requirements. Those come from the Charter of the French Language, administered by the Office québécois de la langue française (OQLF):

  • Information on a product, its container or its packaging must be in French; another language may not prevail over it or be more accessible.
  • Since June 1, 2025, when obligations under Bill 96 (the Act respecting French, the official and common language of Québec) took effect, generic or descriptive words inside a trademark must also appear in French on the product.
  • If a French version of a trademark is registered, that version must appear on the product.
  • Transition rules let some products made before June 1, 2025 be sold until June 1, 2027, under conditions the OQLF sets out.

A lid printing Garlic Dip in large type and trempette à l'ail in small type gives English more prominence, which the Charter does not allow, so design the French panel first. With optional top and side labelling integration and variable data coding, the SDH-R line can apply a French-first label plus a best-before (meilleur avant) date and lot code. Our dip and spread labelling guide covers the federal rules.

Companies with 25 or more employees in Québec over six months must register with the OQLF, whose francization guidance covers machines and software; confirm HMI and manual language options with our engineering team before ordering.

Cup filling machine Saint-Laurent plants can use for longer distribution

Dips sold in the borough's own grocers can live with a short shelf life. Once the same cup has to reach Québec City, Ontario or a chain's distribution centre, every day counts. The SDH-R's optional nitrogen flush lowers residual oxygen in the sealed cup to 0.3–0.4%, and for many refrigerated dips that stretches a typical 7–10 day shelf life to 30–45 days or more, depending on the product.

Garlic-heavy toum and dairy-based labneh age differently from hummus, so validate each recipe with your own shelf-life tests before changing a best-before date; our nitrogen flushing and shelf-life guide lays out a test plan. And once a longer shelf life lets you ship across a provincial border, the CFIA licence comes into play.

Delivery, warranty and support for a Montréal food packaging machine

We are candid about distance: Hummus Pack has no service centre in Québec. Canadian customers, Saint-Laurent plants included, are supported from our Calgary headquarters and Alberta service centre, Monday to Friday, 9:00 AM to 5:00 PM Mountain time, which is 11:00 AM to 7:00 PM in Montréal.

What a Saint-Laurent buyer can expect

TopicDetail
OriginDesigned and built in Calgary, powered by Alter Pack; a domestic shipment with no import duties.
Lead time8–12 weeks from order confirmation.
Warranty12 months.
PriceFrom $45,000 USD with one filler; each added filler, MAP, labelling or custom tooling raises the price.

Because support travels from Alberta, ask during quoting how service visits and spare wear parts will be handled, and make sure two of your own people can manage strip-down and changeover. Call +1 (888) 922-7271 or email sales@hummuspack.com.

When a Saint-Laurent producer should look elsewhere

The SDH-R is the wrong choice if:

  • One SKU needs more than 30 cups per minute; an inline line fits that volume.
  • Dips must be shelf-stable through aseptic or retort processing.
  • You fill bottles, pouches, jars or sachets, or need cups formed on the machine.
  • Portions are under 50 g; two-ounce cups already sit at the bottom of the standard range.
  • Fills are very hot, extremely viscous or full of unusual particulates, unless our engineering team confirms fit before quoting.

Request a quote for a hummus filling machine in Saint-Laurent

  1. Send the recipe, cup size, the cups per minute you need and any options, such as MAP or a second filler.
  2. Expect a call if we need to understand fill temperature, viscosity or particulates.
  3. Receive a quote, normally within about 24 hours.
  4. Confirm the order; delivery follows in 8–12 weeks.

Start on our contact page. For the rest of the island, see our Montréal hummus filling page and the Québec hummus filling hub; for another Lebanese-heritage market, see our Dearborn page. When your recipe and cup are settled, send us your specifications.

Sources and review

Every SDH-R figure on this page is checked line by line against the SDH-R engineering specification, as set out in our editorial policy. The local and regulatory notes rely on these official sources, which we checked when this page was last updated:

Regulatory information here is general guidance, not legal advice; confirm your obligations with the authority or a qualified advisor. Spotted something out of date? Email sales@hummuspack.com or call +1 (888) 922-7271.

Published by Hummus Pack, Calgary, AlbertaTechnical review: SDH-R engineering specification

Hummus Filling Machine in Saint-Laurent, Montréal, QC — Frequently Asked Questions

No. Hummus Pack has no service centre in Québec. Saint-Laurent and other Québec customers are supported from our Calgary headquarters and Alberta service centre, on weekdays from 9 AM to 5 PM Mountain time (11 AM to 7 PM in Montréal). The SDH-R travels from Calgary as a domestic shipment, so there are no import duties, and it arrives 8–12 weeks after order confirmation with a 12-month warranty.

Yes. Under Québec's Charter of the French Language, information on a product, its container or its packaging must be in French, and no other language may prevail over it. Since June 1, 2025, generic or descriptive words inside a trademark must also appear in French. The CFIA separately requires mandatory label information in English and French. On the line, the SDH-R accepts top and side labelling integration and variable data coding.

It depends on the activity. MAPAQ issues Québec's food permits and offers an online identification tool showing which situations need a permit, the exemptions and the costs. Plants making yogurt-based products such as labneh should check the dairy plant permit (permis d'usine laitière). Shipping outside Québec also brings in the CFIA's Safe Food for Canadians licence. Start with the Québec food permits page.

Yes, within limits. It handles pumpable, refrigerated recipes: a servo-driven volumetric piston doses each 50–500 g fill into a pre-formed cup at ±0.5%. Toum is aerated, so pairing the piston with the optional weight checker keeps cups on weight, while labneh should be filled cold to limit whey weeping. Our engineering team confirms viscosity, fill temperature and particulates before quoting.

Pricing begins at $45,000 USD for an SDH-R with a single filler. A Levantine-dip line often adds a peristaltic pump for oil, a garnish or vibration filler, nitrogen MAP or labelling integration, and each raises the price. As a Calgary-built machine moving within Canada, it carries no import duties to Saint-Laurent.

Plan on about 18–25 cups per minute once real product is running, with 30 per minute as the dry-cycle ceiling; thick dips, large cups and extra fillers sit toward the lower end. That is roughly 1,080–1,500 cups per hour of running time before changeovers and breaks. Switching from hummus to toum or labneh takes under about 15 minutes with stored HMI recipes.

Related machines & guides

Explore the pages most relevant to this application.

Why producers buy from Hummus Pack

Designed & built in CalgaryEngineered and manufactured in Alberta, Canada, powered by Alter Pack.
CE, FDA & UL documentationFood-grade 304 stainless steel, FDA-compliant food-contact materials, UL-listed electrics.
12-month warrantyService centres in Alberta, New Jersey and California; 8–12 week delivery.
Transparent pricingSDH-R from $45,000 USD for the single-filler configuration.

Ready to Automate Your Filling Line?

Get a personalized SDH-R configuration and price for your product, cup sizes, and production volume.