Baby Food Filling Machine in Melbourne
SDH-R automatic baby food filling, sealing & cupping for Melbourne food producers. Servo-driven precision at 30 cups per minute — from $45,000 USD.
The Short Answer
Baby food filling machine in Melbourne, Australia: For fresh baby food purées, the SDH-R fills pre-formed cups in one rotary pass, then closes them with heat-sealed roll film and an optional snap-on lid. It is not an aseptic or retort system, so it suits refrigerated purées and products treated after sealing. For Melbourne producers, the SDH-R is built in Calgary and delivered 8-12 weeks after order confirmation, backed by direct support from our Calgary engineering team. The machine is CE-marked, and installation and training details are set out in your quote.
- SpeedUp to 30 cups/min (18–25 in production)
- Fill range50–500 g at ±0.5% accuracy
- Cup sizes4–16 oz standard; 2–32 oz custom
- PriceFrom $45,000 USD
- Lead time8–12 weeks from order
- Built inCalgary, Canada · 12-month warranty
Specifications checked against SDH-R engineering dataEditorial policyCertifications & compliance
Baby Food Packaging for Melbourne Producers
Melbourne is home to Melbourne’s leading Mediterranean-dip, hummus, and gourmet-spread manufacturers. The SDH-R rotary baby food filling, sealing & cupping machine gives these producers a single, compact line that automates cup denesting, volumetric filling, membrane sealing, lidding, and optional nitrogen flushing — without the labour cost of manual packing.
Baby food is the most regulation-intensive category in cup-format food packaging. Every production run must meet the strictest hygiene standards, complete traceability from batch to individual cup, and allergen-control protocols that prevent cross-contamination. The SDH-R's 304 stainless steel construction, integrated CIP system, and PLC-based batch tracking deliver the compliance infrastructure that baby food producers require.
Baby Food Packaging in Melbourne: What Local Producers Should Know
Melbourne's food scene runs through Sydney Road in Brunswick, Footscray, Dandenong and the stalls of Queen Victoria Market, where Greek, Lebanese, Turkish, Italian, Vietnamese and Indian traditions sit side by side. Food makers cluster in the northern suburbs around Campbellfield and Epping, the west near Laverton and Truganina, and the south-east near Dandenong. They supply supermarkets, delis, cafes and a large restaurant trade. Wage costs and the difficulty of staffing repetitive packing shifts make an automatic rotary cup line a practical way to grow output.
Product leaves Melbourne by road along the Hume Highway toward Sydney and the Princes Highway east and west, or through the Port of Melbourne and Melbourne Airport. Hot northerly days in summer test chilled storage, so seal integrity matters. Local councils and the state health department enforce food safety under the FSANZ Food Standards Code. The SDH-R's 304 stainless steel, CIP option, tool-free strip-down and tamper-evident roll-film seal support routine cleaning and audits, and nitrogen MAP is available.
Machine details: Baby food filling machine · SDH-R rotary cup filling and sealing machine: specs and price
Further reading: Food labeling requirements for dips and spreads · Types of food packaging machines · MAP and nitrogen flushing for dip shelf life
Selling Cup-Packed Foods in Melbourne: Labels, Channels and Seasons
In greater Melbourne, a cup-packed product competes for attention in supermarket chilled aisles, specialty delis and the many neighbourhood grocers that serve its large Mediterranean and Middle Eastern communities. Packs are labelled in English as required by FSANZ, and clear allergen and ingredient panels matter because cafes, caterers and meal-kit style delivery services all ask for them. Foodservice is a big channel here: brunch cafes, function caterers and takeaway operators buy larger tubs, while retail wants 150 g to 250 g cups. Seasonal peaks arrive with summer entertaining from December, the Australian Open period in January, and the autumn festival calendar, with Ramadan and Eid adding demand for labneh, tahini and hummus. The SDH-R covers roughly 50 g to 500 g fills, so one machine can serve both retail cups and foodservice sizes, with variable data coding for batch and best-before dates.
| Starting price | From $45,000 USD (single-filler configuration) |
|---|---|
| Lead time | 8–12 weeks from order confirmation |
| Warranty | 12 months |
| Nearest support | Calgary engineering team (remote) |
| Label language | English (FSANZ) |
| Real-world output | 18–25 cups per minute (30 dry-cycle maximum) |
Launch checklist for fresh baby food purée cups
Small portions are typical here. Fills start at 50 g, and 2 oz portion cups sit at the low end of the range, so confirm the exact portion with the engineering team. Seal integrity and a clean flange matter for a product that families will open at home. Nitrogen MAP can extend refrigerated life, and your own shelf-life trials should confirm the date. Always check date coding and labeling requirements for infant products with your market's regulator.
- Confirm the product is a refrigerated purée and share fill temperature and texture.
- Check infant-product labeling and allergen rules for your market before artwork.
- Confirm portion size is at or above 50 g, or discuss options early.
- Validate seal integrity and flange cleanliness on small cups before production.
- Run shelf-life trials with and without nitrogen MAP, then set date codes.
Official references: FSANZ Food Standards Code
Safety-First Design for Infant Nutrition
Pharma-Grade Hygiene
Full 304 stainless steel with electropolished product-contact surfaces. CIP system cleans to dairy-grade standards. Tool-free disassembly for visual inspection.
Allergen Changeover Protocol
Complete strip-down and CIP wash between allergen groups. PLC prompts operator through validated changeover steps to prevent cross-contamination.
Batch Traceability
PLC logs batch number, fill weights, seal integrity, and timestamp for every production run. Exportable data supports HACCP and regulatory audit trails.
Gentle Purée Handling
Servo piston fills smooth purées and chunky textured meals without air incorporation. Consistent fill weights ±0.5% meet the tight tolerances required for infant portion sizes.
SDH-R Configuration for Baby Food
Delivery & Service to Melbourne
Ocean freight to Melbourne port. Typical delivery 10–14 weeks. 230V/50Hz Australian standard. Remote commissioning and video support during AEST business hours.
Baby Food Products We Fill for Melbourne Brands
How the SDH-R Fills Baby Food in Melbourne
Fully automatic process — no manual labour required
Cup Denesting
Empty cups are automatically separated from a nested stack and placed into the rotary table carriers. The pneumatic denester handles round, square, and rectangular cups from 2oz to 32oz — standard formats for baby food brands in Melbourne.
Servo-Driven Filling
The volumetric piston filler draws a precise dose of baby food and dispenses it into the cup. Servo control adjusts stroke length and speed per recipe, holding ±0.5% fill-weight accuracy across every run for Melbourne retail compliance.
Membrane Heat Sealing
Roll-stock film is drawn across the filled cup and heat-sealed to create a tamper-evident, airtight membrane. Temperature, pressure, and dwell time are individually controlled to match your specific film and cup material.
Snap-On Lid (Optional)
A pick-and-place mechanism applies a consumer-friendly snap-on lid over the membrane seal. This two-barrier system provides tamper evidence and reclosability — the standard expected by grocery retailers.
MAP Nitrogen Flush (Optional)
Modified Atmosphere Packaging replaces oxygen with food-grade nitrogen before sealing. For baby food, this extends refrigerated shelf life from 7–10 days to 30–45+ days — essential for distribution across Melbourne and beyond.
Baby Food Filling Machines in Nearby Cities
We also supply baby food packaging lines across Melbourne / Victoria
More Filling Applications in Melbourne
Other products the SDH-R fills for Melbourne producers
Baby Food Filling Machine FAQs: Melbourne
How much does a baby food filling machine cost in Melbourne?
Baby food purée cup filling on the SDH-R starts at $45,000 USD for the single-filler configuration, for fresh and refrigerated products. Nitrogen MAP, additional fillers, labeling and variable data coding, and custom tooling raise the price. Send your purée type, cup size, target speed and options, and the team replies with a quote within about 24 hours.
How is the SDH-R delivered and serviced in Melbourne?
Your SDH-R is built in Calgary and then delivered 8-12 weeks after order confirmation. Melbourne customers are supported directly by our Calgary engineering team, with installation and training details confirmed in the quote. The CE-marked machine carries a 12-month warranty, and we reply to quote requests within about 24 hours.
Need a Baby Food Filling Machine in Melbourne?
Get a personalized SDH-R quote for baby food packaging in Melbourne. From $45,000 USD with a 12-month warranty and dedicated service support.