Baby Food Filling Machine in Moncton
SDH-R automatic baby food filling, sealing & cupping for Moncton food producers. Servo-driven precision at 30 cups per minute — from $45,000 USD.
The Short Answer
Baby food filling machine in Moncton, NB: Hummus Pack's SDH-R is a fully automatic rotary machine that fills, seals and lids fruit and vegetable purée cups for refrigerated baby food. It runs up to 30 cups per minute (18 to 25 in production) and fills 50 to 500 g at ±0.5% with a roll-film seal. In Moncton, a Calgary-built SDH-R comes with an 8-12 week lead time from order confirmation. Support is handled from our Calgary headquarters and Alberta service centre, factory-direct, so New Brunswick buyers pay no import duties on a Canadian-built machine.
- SpeedUp to 30 cups/min (18–25 in production)
- Fill range50–500 g at ±0.5% accuracy
- Cup sizes4–16 oz standard; 2–32 oz custom
- PriceFrom $45,000 USD
- Lead time8–12 weeks from order
- Built inCalgary, Canada · 12-month warranty
Specifications checked against SDH-R engineering dataEditorial policyCertifications & compliance
Baby Food Packaging for Moncton Producers
Moncton is home to Maritime prepared-foods manufacturers and regional co-packers. The SDH-R rotary baby food filling, sealing & cupping machine gives these producers a single, compact line that automates cup denesting, volumetric filling, membrane sealing, lidding, and optional nitrogen flushing — without the labour cost of manual packing.
Baby food is the most regulation-intensive category in cup-format food packaging. Every production run must meet the strictest hygiene standards, complete traceability from batch to individual cup, and allergen-control protocols that prevent cross-contamination. The SDH-R's 304 stainless steel construction, integrated CIP system, and PLC-based batch tracking deliver the compliance infrastructure that baby food producers require.
Baby Food Packaging in Moncton: What Local Producers Should Know
Moncton is the commercial crossroads of the Maritimes, and its bilingual English and Acadian French character shapes how food is made and sold here. New Brunswick supplies dairy, blueberries, potatoes, maple and seafood from the Northumberland Strait and the Bay of Fundy, while Moncton's distribution centres, universities and growing immigrant community build demand for chilled, ready-to-eat items. Smaller processors selling into Maritime grocery and foodservice often struggle to staff manual packing lines, and a rotary cup filler gives them a repeatable way to fill, seal and lid cups for the whole region.
Central location is Moncton's logistics advantage: major highways, rail and Greater Moncton Roméo LeBlanc International Airport connect Halifax, Saint John and Charlottetown. Most mandatory label information on packaged food must appear in both English and French, and cups that cross provincial lines need a Safe Food for Canadians licence from the CFIA. The SDH-R can be paired with labelling equipment, and its tamper-evident roll-film seal and 304 stainless construction suit chilled regional distribution.
Machine details: Baby food filling machine · SDH-R rotary cup filling and sealing machine: specs and price
Further reading: Food labeling requirements for dips and spreads · Types of food packaging machines · MAP and nitrogen flushing for dip shelf life
Selling Cup-Packed Foods in Moncton: Labels, Channels and Seasons
Moncton sits in New Brunswick, the country's only officially bilingual province, so French and English on a cup label is the everyday expectation of shoppers, not just a federal formality. Acadian communities nearby make French wording especially visible, and well-written bilingual packs read as local. Channels include regional supermarket chains, independent grocers, delis and cafes, caterers, and delivery services. Moncton's position as a distribution hub for the Maritimes lets one plant supply stores in all three provinces, which means label versions and varied sizes need to be switched quickly. Summer cottage and tourist season, Christmas entertaining and back-to-school lunches are the main peaks. The SDH-R's recipe changeover of under 15 minutes keeps multiple flavours and label versions practical on one line, variable data coding handles lot and date marking, and optional nitrogen MAP supports the longer trips to Nova Scotia and Newfoundland shelves.
| Starting price | From $45,000 USD (single-filler configuration) |
|---|---|
| Lead time | 8–12 weeks from order confirmation |
| Warranty | 12 months |
| Nearest support | Calgary HQ and Alberta service centre |
| Label language | English and French |
| Real-world output | 18–25 cups per minute (30 dry-cycle maximum) |
Launch checklist for fresh baby food purée cups
Small portions are typical here. Fills start at 50 g, and 2 oz portion cups sit at the low end of the range, so confirm the exact portion with the engineering team. Seal integrity and a clean flange matter for a product that families will open at home. Nitrogen MAP can extend refrigerated life, and your own shelf-life trials should confirm the date. Always check date coding and labeling requirements for infant products with your market's regulator.
- Confirm the product is a refrigerated purée and share fill temperature and texture.
- Check infant-product labeling and allergen rules for your market before artwork.
- Confirm portion size is at or above 50 g, or discuss options early.
- Validate seal integrity and flange cleanliness on small cups before production.
- Run shelf-life trials with and without nitrogen MAP, then set date codes.
Official references: CFIA food licences (SFCR) · CFIA labelling requirements
Safety-First Design for Infant Nutrition
Pharma-Grade Hygiene
Full 304 stainless steel with electropolished product-contact surfaces. CIP system cleans to dairy-grade standards. Tool-free disassembly for visual inspection.
Allergen Changeover Protocol
Complete strip-down and CIP wash between allergen groups. PLC prompts operator through validated changeover steps to prevent cross-contamination.
Batch Traceability
PLC logs batch number, fill weights, seal integrity, and timestamp for every production run. Exportable data supports HACCP and regulatory audit trails.
Gentle Purée Handling
Servo piston fills smooth purées and chunky textured meals without air incorporation. Consistent fill weights ±0.5% meet the tight tolerances required for infant portion sizes.
SDH-R Configuration for Baby Food
Delivery & Service to Moncton
Atlantic Canada producers receive factory support from Calgary HQ. Overland freight delivery to Halifax or Moncton is typically 7–10 business days. Bilingual English-French documentation available.
Baby Food Products We Fill for Moncton Brands
How the SDH-R Fills Baby Food in Moncton
Fully automatic process — no manual labour required
Cup Denesting
Empty cups are automatically separated from a nested stack and placed into the rotary table carriers. The pneumatic denester handles round, square, and rectangular cups from 2oz to 32oz — standard formats for baby food brands in Moncton.
Servo-Driven Filling
The volumetric piston filler draws a precise dose of baby food and dispenses it into the cup. Servo control adjusts stroke length and speed per recipe, holding ±0.5% fill-weight accuracy across every run for Moncton retail compliance.
Membrane Heat Sealing
Roll-stock film is drawn across the filled cup and heat-sealed to create a tamper-evident, airtight membrane. Temperature, pressure, and dwell time are individually controlled to match your specific film and cup material.
Snap-On Lid (Optional)
A pick-and-place mechanism applies a consumer-friendly snap-on lid over the membrane seal. This two-barrier system provides tamper evidence and reclosability — the standard expected by grocery retailers.
MAP Nitrogen Flush (Optional)
Modified Atmosphere Packaging replaces oxygen with food-grade nitrogen before sealing. For baby food, this extends refrigerated shelf life from 7–10 days to 30–45+ days — essential for distribution across Moncton and beyond.
Baby Food Filling Machines in Nearby Cities
We also supply baby food packaging lines across Atlantic Canada
More Filling Applications in Moncton
Other products the SDH-R fills for Moncton producers
Baby Food Filling Machine FAQs: Moncton
How much does a baby food filling machine cost in Moncton?
Baby food purée cup filling on the SDH-R starts at $45,000 USD for the single-filler configuration, for fresh and refrigerated products. Nitrogen MAP, additional fillers, labeling and variable data coding, and custom tooling raise the price. Send your purée type, cup size, target speed and options, and the team replies with a quote within about 24 hours.
How is the SDH-R delivered and serviced in Moncton?
Your SDH-R is built in Calgary and delivered to Moncton 8-12 weeks after order confirmation. After installation, support comes from our Calgary headquarters and Alberta service centre, factory-direct with no import duties. It carries a 12-month warranty, and we typically answer quote requests within about 24 hours.
Need a Baby Food Filling Machine in Moncton?
Get a personalized SDH-R quote for baby food packaging in Moncton. From $45,000 USD with a 12-month warranty and dedicated service support.