Baby Food Filling Machine in Montreal
SDH-R automatic baby food filling, sealing & cupping for Montreal food producers. Servo-driven precision at 30 cups per minute — from $45,000 USD.
The Short Answer
Baby food filling machine in Montreal, QC: Hummus Pack's SDH-R is a fully automatic rotary machine that fills, seals and lids fruit and vegetable purée cups for refrigerated baby food. It runs up to 30 cups per minute (18 to 25 in production) and fills 50 to 500 g at ±0.5% with a roll-film seal. Montreal producers get an SDH-R built in Calgary, with an 8-12 week lead time from order confirmation. Our Calgary headquarters and Alberta service centre handle support, factory-direct, with no import duties on a Canadian-built machine.
- SpeedUp to 30 cups/min (18–25 in production)
- Fill range50–500 g at ±0.5% accuracy
- Cup sizes4–16 oz standard; 2–32 oz custom
- PriceFrom $45,000 USD
- Lead time8–12 weeks from order
- Built inCalgary, Canada · 12-month warranty
Specifications checked against SDH-R engineering dataEditorial policyCertifications & compliance
Baby Food Packaging for Montreal Producers
Montreal is home to Montreal dairy, yogurt, Greek-style dip, and cheese-spread producers, with bilingual documentation support. The SDH-R rotary baby food filling, sealing & cupping machine gives these producers a single, compact line that automates cup denesting, volumetric filling, membrane sealing, lidding, and optional nitrogen flushing — without the labour cost of manual packing.
Baby food is the most regulation-intensive category in cup-format food packaging. Every production run must meet the strictest hygiene standards, complete traceability from batch to individual cup, and allergen-control protocols that prevent cross-contamination. The SDH-R's 304 stainless steel construction, integrated CIP system, and PLC-based batch tracking deliver the compliance infrastructure that baby food producers require.
Baby Food Packaging in Montreal: What Local Producers Should Know
Montreal is the centre of Quebec's food manufacturing, with Jean-Talon and Atwater markets, long-established bakeries, cheese shops and delis, and strong Lebanese, Greek, Italian, Moroccan, Haitian and Vietnamese communities. Producers on the island and in Laval, Longueuil and the south shore supply grocery chains, specialty shops, cafes and restaurants with chilled fresh foods. Rising wages, bilingual packaging requirements and the need to keep portion weights consistent across many SKUs push makers to automate their filling lines and free staff for production, quality checks and delivery.
The Port of Montreal, Trudeau airport, rail and the Highway 15, 20 and 40 network give producers access to Ontario, the northeastern US and Atlantic Canada. Hot, humid summers and freezing winters both test the cold chain. Quebec-only sales are overseen by MAPAQ; interprovincial and export trade needs a CFIA licence, and French labelling is required. The SDH-R's HMI stores recipes, and changeovers run under about 15 minutes between SKUs, which suits plants running many products.
Machine details: Baby food filling machine · SDH-R rotary cup filling and sealing machine: specs and price
Further reading: Food labeling requirements for dips and spreads · Types of food packaging machines · MAP and nitrogen flushing for dip shelf life
Selling Cup-Packed Foods in Montreal: Labels, Channels and Seasons
Montreal is where French-language label rules meet one of the country's most varied food scenes. Cup labels must show French at least as prominently as any other language under the Charter of the French Language, with English added for the federal bilingual standard. Lebanese, Greek, Moroccan, Haitian, Italian and Asian communities support independent and ethnic grocers, while supermarket chains, delis, cafes, bakeries, caterers, public markets and delivery apps handle the mass market. Seasonal peaks include terrace and festival summers, the holiday reveillon, Ramadan and Eid, Greek and Orthodox Easter, and back-to-school. Dip and spread culture is already strong, so differentiation comes from flavour and freshness. The SDH-R's changeover under 15 minutes helps one line produce multiple recipes and French-first label versions, with variable data coding for lot and date marking, and optional MAP for longer distribution into Ontario and the Maritimes.
| Starting price | From $45,000 USD (single-filler configuration) |
|---|---|
| Lead time | 8–12 weeks from order confirmation |
| Warranty | 12 months |
| Nearest support | Calgary HQ and Alberta service centre |
| Label language | French and English (French prominent) |
| Real-world output | 18–25 cups per minute (30 dry-cycle maximum) |
Launch checklist for fresh baby food purée cups
Small portions are typical here. Fills start at 50 g, and 2 oz portion cups sit at the low end of the range, so confirm the exact portion with the engineering team. Seal integrity and a clean flange matter for a product that families will open at home. Nitrogen MAP can extend refrigerated life, and your own shelf-life trials should confirm the date. Always check date coding and labeling requirements for infant products with your market's regulator.
- Confirm the product is a refrigerated purée and share fill temperature and texture.
- Check infant-product labeling and allergen rules for your market before artwork.
- Confirm portion size is at or above 50 g, or discuss options early.
- Validate seal integrity and flange cleanliness on small cups before production.
- Run shelf-life trials with and without nitrogen MAP, then set date codes.
Official references: CFIA food licences (SFCR) · CFIA labelling requirements
Safety-First Design for Infant Nutrition
Pharma-Grade Hygiene
Full 304 stainless steel with electropolished product-contact surfaces. CIP system cleans to dairy-grade standards. Tool-free disassembly for visual inspection.
Allergen Changeover Protocol
Complete strip-down and CIP wash between allergen groups. PLC prompts operator through validated changeover steps to prevent cross-contamination.
Batch Traceability
PLC logs batch number, fill weights, seal integrity, and timestamp for every production run. Exportable data supports HACCP and regulatory audit trails.
Gentle Purée Handling
Servo piston fills smooth purées and chunky textured meals without air incorporation. Consistent fill weights ±0.5% meet the tight tolerances required for infant portion sizes.
SDH-R Configuration for Baby Food
Delivery & Service to Montreal
Quebec producers receive factory support from Calgary HQ with bilingual English-French documentation. Overland freight delivery to Montreal is typically 6–8 business days. MAPAQ and CFIA compliance documentation included.
Baby Food Products We Fill for Montreal Brands
How the SDH-R Fills Baby Food in Montreal
Fully automatic process — no manual labour required
Cup Denesting
Empty cups are automatically separated from a nested stack and placed into the rotary table carriers. The pneumatic denester handles round, square, and rectangular cups from 2oz to 32oz — standard formats for baby food brands in Montreal.
Servo-Driven Filling
The volumetric piston filler draws a precise dose of baby food and dispenses it into the cup. Servo control adjusts stroke length and speed per recipe, holding ±0.5% fill-weight accuracy across every run for Montreal retail compliance.
Membrane Heat Sealing
Roll-stock film is drawn across the filled cup and heat-sealed to create a tamper-evident, airtight membrane. Temperature, pressure, and dwell time are individually controlled to match your specific film and cup material.
Snap-On Lid (Optional)
A pick-and-place mechanism applies a consumer-friendly snap-on lid over the membrane seal. This two-barrier system provides tamper evidence and reclosability — the standard expected by grocery retailers.
MAP Nitrogen Flush (Optional)
Modified Atmosphere Packaging replaces oxygen with food-grade nitrogen before sealing. For baby food, this extends refrigerated shelf life from 7–10 days to 30–45+ days — essential for distribution across Montreal and beyond.
Baby Food Filling Machines in Nearby Cities
We also supply baby food packaging lines across Quebec
More Filling Applications in Montreal
Other products the SDH-R fills for Montreal producers
Baby Food Filling Machine FAQs: Montreal
How much does a baby food filling machine cost in Montreal?
Baby food purée cup filling on the SDH-R starts at $45,000 USD for the single-filler configuration, for fresh and refrigerated products. Nitrogen MAP, additional fillers, labeling and variable data coding, and custom tooling raise the price. Send your purée type, cup size, target speed and options, and the team replies with a quote within about 24 hours.
How is the SDH-R delivered and serviced in Montreal?
Each SDH-R is built in Calgary and delivered to Montreal on an 8-12 week lead time from order confirmation. Customers are supported from our Calgary headquarters and Alberta service centre, factory-direct and free of import duties. The warranty covers 12 months, and we reply to quotes in about 24 hours.
Need a Baby Food Filling Machine in Montreal?
Get a personalized SDH-R quote for baby food packaging in Montreal. From $45,000 USD with a 12-month warranty and dedicated service support.