Baby Food Filling Machine in Salt Lake City
SDH-R automatic baby food filling, sealing & cupping for Salt Lake City food producers. Servo-driven precision at 30 cups per minute — from $45,000 USD.
The Short Answer
Baby food filling machine in Salt Lake City, UT: Hummus Pack's SDH-R is a fully automatic rotary machine that fills, seals and lids fruit and vegetable purée cups for refrigerated baby food. It runs up to 30 cups per minute (18 to 25 in production) and fills 50 to 500 g at ±0.5% with a roll-film seal. In Salt Lake City, the SDH-R is built in Calgary and delivered 8-12 weeks after order confirmation, and Utah producers are supported from our California service centre, the nearest of our service locations.
- SpeedUp to 30 cups/min (18–25 in production)
- Fill range50–500 g at ±0.5% accuracy
- Cup sizes4–16 oz standard; 2–32 oz custom
- PriceFrom $45,000 USD
- Lead time8–12 weeks from order
- Built inCalgary, Canada · 12-month warranty
Specifications checked against SDH-R engineering dataEditorial policyCertifications & compliance
Baby Food Packaging for Salt Lake City Producers
Salt Lake City is home to Utah’s growing health-food and supplement-adjacent spread manufacturers. The SDH-R rotary baby food filling, sealing & cupping machine gives these producers a single, compact line that automates cup denesting, volumetric filling, membrane sealing, lidding, and optional nitrogen flushing — without the labour cost of manual packing.
Baby food is the most regulation-intensive category in cup-format food packaging. Every production run must meet the strictest hygiene standards, complete traceability from batch to individual cup, and allergen-control protocols that prevent cross-contamination. The SDH-R's 304 stainless steel construction, integrated CIP system, and PLC-based batch tracking deliver the compliance infrastructure that baby food producers require.
Baby Food Packaging in Salt Lake City: What Local Producers Should Know
Salt Lake City sits at the center of the Wasatch Front, where Utah's food manufacturers, dairies and regional distributors cluster along Interstates 15 and 80. Cache Valley to the north has a long dairy and cheesemaking tradition, and Utah's larger-than-average households keep grocery volumes high. Polynesian, Latino and Mediterranean communities, a wellness-minded population and a busy ski-resort and tourism trade support demand for chilled dips, spreads, sauces and cultured dairy. Labor is competitive along the Wasatch Front, so automated filling and sealing helps local brands scale without hand-packing every cup.
Salt Lake City is a crossroads of Interstates 15 and 80 and of western rail lines, so chilled freight can reach Idaho, Nevada, Colorado and the Pacific coast, though winter snow and mountain grades call for planning. Utah food manufacturers answer to the Utah Department of Agriculture and Food in addition to FDA's Preventive Controls for Human Food rule (21 CFR Part 117). The SDH-R's tamper-evident roll-film seal and tool-free strip-down suit those requirements.
Machine details: Baby food filling machine · SDH-R rotary cup filling and sealing machine: specs and price
Further reading: Food labeling requirements for dips and spreads · Types of food packaging machines · MAP and nitrogen flushing for dip shelf life
Selling Cup-Packed Foods in Salt Lake City: Labels, Channels and Seasons
Salt Lake City has a family-oriented retail culture, and shoppers buy fresh dips and spreads for large gatherings, church and community events, and school lunches. Labels are in English under FDA rules, with clear allergen and ingredient statements expected. Producers typically sell through supermarket chains, regional grocers, natural-food stores, Latin and Middle Eastern independents, delis, cafes, caterers and delivery apps, with hotel and event kitchens adding foodservice volume. Summer is busy with outdoor recreation, picnics and barbecue entertaining, ski season brings visitors to nearby resorts, and holiday entertaining and back-to-school lunchbox weeks add further peaks. Because larger household sizes favour bigger tubs alongside single-serve cups, a producer may run several formats. The SDH-R covers 4, 8, 10 and 16 oz standard cups, with custom sizes from 2 to 32 oz on matching tooling, recipe changeovers under about 15 minutes, and top and side labelling integration options.
| Starting price | From $45,000 USD (single-filler configuration) |
|---|---|
| Lead time | 8–12 weeks from order confirmation |
| Warranty | 12 months |
| Nearest support | California service center |
| Label language | English (FDA) |
| Real-world output | 18–25 cups per minute (30 dry-cycle maximum) |
Launch checklist for fresh baby food purée cups
Small portions are typical here. Fills start at 50 g, and 2 oz portion cups sit at the low end of the range, so confirm the exact portion with the engineering team. Seal integrity and a clean flange matter for a product that families will open at home. Nitrogen MAP can extend refrigerated life, and your own shelf-life trials should confirm the date. Always check date coding and labeling requirements for infant products with your market's regulator.
- Confirm the product is a refrigerated purée and share fill temperature and texture.
- Check infant-product labeling and allergen rules for your market before artwork.
- Confirm portion size is at or above 50 g, or discuss options early.
- Validate seal integrity and flange cleanliness on small cups before production.
- Run shelf-life trials with and without nitrogen MAP, then set date codes.
Official references: FDA Preventive Controls for Human Food · FDA food labeling guidance
Safety-First Design for Infant Nutrition
Pharma-Grade Hygiene
Full 304 stainless steel with electropolished product-contact surfaces. CIP system cleans to dairy-grade standards. Tool-free disassembly for visual inspection.
Allergen Changeover Protocol
Complete strip-down and CIP wash between allergen groups. PLC prompts operator through validated changeover steps to prevent cross-contamination.
Batch Traceability
PLC logs batch number, fill weights, seal integrity, and timestamp for every production run. Exportable data supports HACCP and regulatory audit trails.
Gentle Purée Handling
Servo piston fills smooth purées and chunky textured meals without air incorporation. Consistent fill weights ±0.5% meet the tight tolerances required for infant portion sizes.
SDH-R Configuration for Baby Food
Delivery & Service to Salt Lake City
Mountain West producers are supported through our California service center. Machines ship from Calgary via overland freight with typical delivery in 3–5 weeks.
Baby Food Products We Fill for Salt Lake City Brands
How the SDH-R Fills Baby Food in Salt Lake City
Fully automatic process — no manual labour required
Cup Denesting
Empty cups are automatically separated from a nested stack and placed into the rotary table carriers. The pneumatic denester handles round, square, and rectangular cups from 2oz to 32oz — standard formats for baby food brands in Salt Lake City.
Servo-Driven Filling
The volumetric piston filler draws a precise dose of baby food and dispenses it into the cup. Servo control adjusts stroke length and speed per recipe, holding ±0.5% fill-weight accuracy across every run for Salt Lake City retail compliance.
Membrane Heat Sealing
Roll-stock film is drawn across the filled cup and heat-sealed to create a tamper-evident, airtight membrane. Temperature, pressure, and dwell time are individually controlled to match your specific film and cup material.
Snap-On Lid (Optional)
A pick-and-place mechanism applies a consumer-friendly snap-on lid over the membrane seal. This two-barrier system provides tamper evidence and reclosability — the standard expected by grocery retailers.
MAP Nitrogen Flush (Optional)
Modified Atmosphere Packaging replaces oxygen with food-grade nitrogen before sealing. For baby food, this extends refrigerated shelf life from 7–10 days to 30–45+ days — essential for distribution across Salt Lake City and beyond.
Baby Food Filling Machines in Nearby Cities
We also supply baby food packaging lines across Colorado & Mountain West
More Filling Applications in Salt Lake City
Other products the SDH-R fills for Salt Lake City producers
Baby Food Filling Machine FAQs: Salt Lake City
How much does a baby food filling machine cost in Salt Lake City?
Baby food purée cup filling on the SDH-R starts at $45,000 USD for the single-filler configuration, for fresh and refrigerated products. Nitrogen MAP, additional fillers, labeling and variable data coding, and custom tooling raise the price. Send your purée type, cup size, target speed and options, and the team replies with a quote within about 24 hours.
How is the SDH-R delivered and serviced in Salt Lake City?
A Salt Lake City SDH-R is built in Calgary and delivered 8-12 weeks after order confirmation. Support for Utah comes from our California service centre, the nearest of our service locations. The warranty runs 12 months, and our team replies to quote requests within about 24 hours.
Need a Baby Food Filling Machine in Salt Lake City?
Get a personalized SDH-R quote for baby food packaging in Salt Lake City. From $45,000 USD with a 12-month warranty and dedicated service support.