Applesauce Filling Machine for Refrigerated Fruit Cups, Purees and Compotes - SDH-R automatic rotary cup filler and sealer
Fruit Puree Equipment

Applesauce Filling Machine for Refrigerated Fruit Cups, Purees and Compotes

Portion smooth or chunky applesauce, fruit purees and compotes into pre-formed cups and tubs, then seal and lid them on one rotary turret. Servo piston accuracy of ±0.5%, optional nitrogen flush, 18-25 cups per minute in production.

The Short Answer

An applesauce filling machine portions applesauce, fruit puree or compote into pre-formed cups and tubs, then seals them. Hummus Pack's SDH-R, a rotary applesauce filling machine for fresh and refrigerated fruit cups, uses a servo piston to deposit 50-500 g at ±0.5%, passes chunks through large-bore valving, and adds a heat-sealed membrane, optional nitrogen flush and lid at 18-25 cups per minute. It starts at $45,000 USD and is not a hot-fill or aseptic system.

SDH-R key facts
Best fit
Fresh and refrigerated applesauce, fruit purees, compotes
Production rate
18-25 cups/min real-world (30 on a dry cycle)
Fill weight
50-500 g (approx. 2-17 oz) at ±0.5%
Cup formats
4, 8, 10, 16 oz standard; custom 2-32 oz with tooling
Oxygen control
Optional nitrogen flush to 0.3-0.4% residual O2
Flavor changeover
Under ~15 minutes using stored HMI recipes
Starting price
From $45,000 USD, single-filler build

Applesauce Filling Machine: What It Does and Which Products It Suits

An applesauce filling machine meters a set weight of applesauce into each cup or tub, keeps the sealing flange clean and closes the container for the refrigerated case. Our SDH-R does it on an indexing turret: it denests a pre-formed cup, doses it through a servo-driven volumetric piston, heat-seals film cut from a roll, and can flush the headspace with nitrogen and press on a plastic lid before discharge. Full specifications are on the SDH-R product page.

The same build covers the wider fruit family: smooth and chunky applesauce, cinnamon and mixed-fruit blends, berry and stone-fruit purees, compotes with soft pieces, and fruit sauces layered under yogurt or granola. All of them are cold-chain foods filled at a pumpable temperature, which is not how most center-aisle grocery applesauce cups are made, as we explain below.

How Applesauce Behaves in a Fruit Puree Filling Machine

Applesauce looks simple until it runs a full shift. Four properties decide how it fills.

Smooth versus chunky texture

Smooth applesauce is finely milled and cuts off cleanly at the nozzle. Chunky styles carry diced apple that can bridge a narrow valve, get crushed, or hang from the nozzle tip and drop onto the flange. For these we specify large-bore valving sized to the largest piece you want intact. Tell us the dice size and roughly what share of the product is chunks.

Body that shifts with temperature

Pectin and fine pulp give applesauce its body, and cold makes it stiffer. A batch chilled overnight fills differently from one still cooling from the cooker. Because a volumetric piston moves a fixed volume, changes in density or in how fully the cylinder charges show up as weight drift, so hold the supply at a steady temperature and consider adding the weight-checking option, which feeds measured cup weights back to the filler.

Entrained air

Air enters at the finisher, through a cavitating transfer pump, or when product cascades into a half-empty hopper. Bubbles make cups light for their volume, show as voids under a clear lid and put oxygen against the fruit. Keep the hopper flooded and return bypass flow below the surface.

Free liquid and settling

Purees with added juice can release a watery serum when they stand, which pools in the cup and wets the underside of the seal. Gentle mixing of the supply tote and short hold times keep the product uniform; a filler can only deposit what it is given.

Browning, Oxygen and Seal Quality on a Fruit Cup Sealing Machine

Cut apples brown when enzymes and oxygen react with the fruit's phenolic compounds. Cooking inactivates most of that enzyme activity, yet cooked applesauce still darkens and loses fresh flavor as oxygen acts on it in cold storage. Part of the protection is in the recipe: the US standard for canned applesauce, 21 CFR 145.110, allows ascorbic or erythorbic acid as antioxidant ingredients. The package decides how much oxygen is left.

  • Nitrogen flush. The optional MAP station displaces headspace air before sealing, bringing residual oxygen inside the cup down to 0.3-0.4%.
  • Headspace. A repeatable fill height gives a consistent gas volume and keeps puree off the flange.
  • Barrier. Film and cup material set how fast oxygen returns; a flush cannot rescue a low-barrier pack.

Sugary puree is also a sealing hazard: a smear on the flange caramelizes under the sealing head and leaves a weak or channeled bond. We fit suck-back (drip-free) nozzles for most applesauce work and set seal temperature, pressure and dwell for your film at commissioning. Gas flushing is covered in depth on our MAP cup filler page.

We do not quote an applesauce shelf life; it depends on recipe, acidity, filling hygiene, film barrier and cold-chain temperature, and must come from your own shelf-life study.

Applesauce Cup Filling Machine Formats and Closures

The SDH-R moves between fruit-cup formats with change parts rather than a second machine:

  • 4 oz single-serve cups (about 113 g) for lunch programs, catering and grab-and-go: standard.
  • 8, 10 and 16 oz tubs for refrigerated retail and deli: standard.
  • 2 oz side cups: the bottom of the 50-500 g range.
  • Square and rectangular cups: supported with matching tooling.
  • Pouches, squeeze packs, jars and bottles: not supported.

Most refrigerated fruit cups close with a peelable heat-sealed membrane cut from roll film, plus a snap-on over-cap on tubs that get opened more than once; pre-die-cut lids are optional. For linked multipack strips, send a sample and our engineers will confirm fit. Size detail is on our portion cup filling machine and tub filling machine pages.

Get a configured SDH-R quote for your productSend your product, cup size and target cups per minute — we reply within 24 hours.

Request a quote

Fruit Puree and Compote Filling Machine Setup by Product

Valving, nozzle and filler count follow from how each fruit product moves; final settings come from trials on your product.

Applesauce and fruit puree types matched to an SDH-R configuration

Fruit productFilling behaviorSuggested configuration
Smooth applesauceEven body, stiffens when cold, clean cutoffVolumetric piston, suck-back nozzle, steady supply temperature
Chunky applesauceApple dice can bridge valves or tail at the tipLarge-bore valving sized to the dice, cut-off nozzle
Fruit compoteSoft pieces in syrup that can separateLarge-bore piston for fruit; second filler for syrup if needed
Berry pureeThinner body, seeds, color that stains flangesPiston with suck-back; seed size checked in trials
Fruit layer for parfaitSmall deposit that must sit level against yogurtPiston as one of up to three fillers; garnish filler for granola
Apple-vegetable blendsThicker body, higher pH than plain applePiston; process authority confirms pH before we quote

A fruit layer is often one step in a multi-component cup: fruit, a yogurt or cream base and a dry topping can each have a filler in one pass, as our parfait cup filling machine and dessert cup filling machine pages show. As a compote filling machine or fruit sauce cup filler, only valving, nozzle and recipe change.

Shelf-Stable Versus Refrigerated Applesauce Cups: Where the SDH-R Fits

Settle this before comparing machines. Most shelf-stable applesauce cups sold at room temperature are hot-filled or aseptically processed; the thermal treatment of product and package is what makes them safe on a dry shelf, and the filler is built around that process. The federal standard for canned applesauce describes exactly that: a food sealed in containers and heat-processed, before or after sealing, to prevent spoilage.

The SDH-R is not a hot-fill, aseptic or retort machine and we do not rate it for those processes. It suits applesauce and purees prepared upstream, brought to a pumpable temperature, filled, sealed and kept cold to the consumer:

  • Refrigerated and fresh-style applesauce sold from the dairy or deli case
  • Chilled fruit purees and compotes for retail, meal kits and prepared-food counters
  • Foodservice, school-lunch and catering cups that travel in a cold chain
  • Fruit layers in parfaits, yogurt cups and desserts
  • Refrigerated purees for infants and toddlers, covered on our baby food filling machine page

Look elsewhere if the product must sit unrefrigerated, relies on a hot fill, goes into pouches or jars, or needs more than 30 cups per minute on one SKU all day; our rotary versus inline comparison shows that crossover. If you fill warm, fill temperature and viscosity extremes are checked by our engineering team before we quote, so share your process details early. How a refrigerated product is named against the canned applesauce standard is a question for your regulatory adviser.

Food Safety on an Applesauce Filling Line: Acidity, Patulin and HACCP

General guidance only; your process authority validates recipe, controls and shelf life.

A naturally acidic fruit product

Apples are naturally acidic, so plain applesauce sits below the pH 4.6 line that US rules use to separate acid foods from low-acid foods (21 CFR 114.3). That acidity holds back many bacterial pathogens but not yeasts and molds, the usual spoilage organisms in cold-filled fruit. Carrot, sweet potato and other low-acid ingredients can raise a blend's pH, so measure every recipe.

Patulin starts with the fruit, not the filler

Patulin is a mycotoxin produced by molds that can grow on damaged or decaying apples. FDA's compliance policy (CPG Sec. 510.150) addresses it in apple juice products, and Health Canada's contaminant list sets a limit for apple juice and unfermented cider. Neither names applesauce, but the hazard comes from the same fruit, so cover it in your hazard analysis through supplier controls and culling rotten apples. No filling machine can lower patulin.

Controls at the filling step

Cold-filled applesauce gets no further heat treatment in the cup, so sanitary design, cleaning verification and environmental monitoring around the filler carry the load. The SDH-R combines 304 stainless steel construction, tool-free strip-down and an optional CIP system, and it seals each cup on the turret that filled it. It supports plants operating under HACCP, FSMA Preventive Controls (21 CFR Part 117), Canada's Safe Food for Canadians Regulations, SQF or BRCGS, without being certified to them itself. See our HACCP plan guide for dips, sauces and spreads and our certifications and compliance page.

Applesauce Filling Machine Output: Cups per Shift and Changeovers

Plan on the production rate, not the 30 cups per minute the SDH-R reaches with no product. For applesauce the band is 18-25 cups per minute; texture, cup size, fill weight and stations such as nitrogen flush and lidding decide where you land. A worked example:

  1. At 18 cups per minute: 1,080 cups an hour, 8,640 per uninterrupted eight-hour shift.
  2. At 25 cups per minute: 1,500 cups an hour, 12,000 per shift.
  3. In 4 oz cups of about 113 g, 22 cups per minute moves roughly 149 kg of applesauce an hour.
  4. Three flavor changes (original, cinnamon, strawberry-apple) at under about 15 minutes each cost up to 45 minutes, about 990 cups at 22 per minute.

Subtract breaks, startup and sanitation, and size for your peak season rather than an average week. Our filling machine capacity sizing guide walks through the full calculation. If the top of the band still leaves one SKU short, a second rotary machine or an inline line is the honest answer.

Flavor Changeovers, Cleaning and Allergens

Switching applesauce flavors is mostly a recipe change: fill volume, stroke profile and seal settings are stored on the HMI, so moving to the next SKU takes under about 15 minutes. That is not a sanitation clean. Sugar and fruit acid residue in the cylinder and valves feed spoilage organisms, so schedule full washdowns at the frequency your sanitation program sets.

Plain applesauce is not a major allergen, but fruit cups rarely run alone. Yogurt (milk), granola with tree nuts or wheat, or a sesame item on another shift belong in your allergen control plan; sesame joined the US major allergen list as the ninth on January 1, 2023. Run allergen-free products after a validated, verified clean.

Buying an Applesauce Filling Machine: Price, Delivery and Your Quote

SDH-R pricing begins at $45,000 USD with one filler, and each addition (more fillers, nitrogen MAP, labeling, a weight checker, CIP or custom tooling) moves the figure up. Machines are built in Calgary, Alberta, ship within 8-12 weeks of order confirmation and carry a 12-month warranty, with service centres in New Jersey, California and Alberta supporting fruit processors across the United States and Canada.

To quote, we need the product (smooth or chunky, largest piece, fill temperature), cup size and fill weight, target cups per minute and options. We may call to learn more and normally reply within about 24 hours. Request an applesauce filling machine quote, phone our sales line at +1 (888) 922-7271, or write to sales@hummuspack.com, weekdays 9:00 AM-5:00 PM MDT.

Sources and review

Every SDH-R figure on this page is checked line by line against the SDH-R engineering specification, as set out in our editorial policy. The regulatory and food-safety notes rely on these official sources, which we checked when this page was last updated:

Regulatory information here is general guidance, not legal advice; confirm your obligations with the authority or a qualified advisor. Spotted something out of date? Email sales@hummuspack.com or call +1 (888) 922-7271.

Published by Hummus Pack, Calgary, AlbertaTechnical review: SDH-R engineering specification

Applesauce Filling Machine — Frequently Asked Questions

Pricing for the Hummus Pack SDH-R applesauce filling machine begins at $45,000 USD for one filler. The total climbs as you add a second or third filler, nitrogen flushing, labeling, CIP, weight checking or tooling for custom cups. Each machine is built in Calgary, delivered 8-12 weeks from order confirmation and backed by a 12-month warranty. Request pricing on our quote request page.

No. Shelf-stable applesauce cups are usually hot-filled or aseptically processed, and we do not rate the SDH-R for hot-fill, aseptic or retort work. It fills fresh and refrigerated applesauce, purees and compotes at a pumpable temperature into pre-formed cups for cold-chain distribution. If you fill warm, our engineers confirm the temperature before quoting.

In production the SDH-R fills applesauce at 18-25 cups per minute, between 1,080 and 1,500 cups an hour, or about 8,600 to 12,000 per uninterrupted eight-hour shift. Its 30 cups per minute figure is a dry-cycle rate. Texture, cup size, fill weight and the optional stations you run decide where a product lands.

Usually, within limits confirmed on your product. Large-bore valving passes apple dice and soft fruit pieces without crushing them or blocking the valve, and an optional garnish filler can place bigger pieces separately. Share the largest piece size and the proportion of chunks; our engineers check particle size, viscosity and fill temperature before quoting.

It slows it. With the optional nitrogen MAP station, residual oxygen in each sealed SDH-R cup falls to 0.3-0.4%, leaving less oxygen to darken fruit and flatten flavor. Antioxidants such as ascorbic acid, film barrier and cold storage matter as much. We do not quote an applesauce shelf life; confirm it through your own testing.

The SDH-R fills pre-formed round, square or rectangular cups: 4, 8, 10 and 16 oz as standard, custom 2-32 oz with matching tooling, within a 50-500 g fill range. A 4 oz applesauce cup holds about 113 g, well inside that range. Pouches, squeeze packs, jars and bottles are not supported.

Under about 15 minutes for a SKU change on the SDH-R, because fill volume, stroke profile and seal settings for each flavor are saved as HMI recipes, so moving from original to cinnamon or berry-apple is quick. A full sanitation clean, or an allergen clean when the line also runs dairy or nut toppings, takes longer and follows your validated procedure.

The SDH-R fills smooth fruit purees into pre-formed cups at ±0.5% accuracy, so it can suit refrigerated infant and toddler purees within the 50-500 g range. Baby food carries stricter expectations for texture, ingredient sourcing and contaminant control, which your food safety team sets and validates before the first production run.

Related machines & guides

Explore the pages most relevant to this application.

Why producers buy from Hummus Pack

Designed & built in CalgaryEngineered and manufactured in Alberta, Canada, powered by Alter Pack.
CE, FDA & UL documentationFood-grade 304 stainless steel, FDA-compliant food-contact materials, UL-listed electrics.
12-month warrantyService centres in Alberta, New Jersey and California; 8–12 week delivery.
Transparent pricingSDH-R from $45,000 USD for the single-filler configuration.

Ready to Quote Your Applesauce Filling Machine?

Get a personalized SDH-R configuration and price for your product, cup sizes, and production volume.