
Baby Food Filling Machine for Puree Cups and Toddler Meal Tubs
Portion smooth Stage 1 purees, textured blends and toddler meals into pre-formed cups, then close each one with a tamper-evident film seal and an optional snap-on lid. Servo piston accuracy of ±0.5% on fills from 50 g.
A baby food filling machine portions puree into containers and closes them. Hummus Pack's SDH-R is a rotary baby food filling machine built for pre-formed cups and tubs: its servo piston doses 50-500 g of smooth or textured puree within ±0.5%, roll film is heat-sealed as a tamper-evident membrane, and nitrogen flush and snap-on lids are options. Expect 18-25 cups a minute in production, from $45,000 USD. Pouches and jars need other equipment.
- Built for
- Refrigerated purees and toddler meals in pre-formed cups
- Portion range
- 50-500 g standard; 2 oz cups at the low end
- Fill accuracy
- ±0.5% with a servo-driven volumetric piston
- Throughput
- 18-25 cups/min in production (30 on a dry cycle)
- Closure
- Roll-film membrane seal plus optional snap-on lid
- Hygiene
- 304 stainless, tool-free strip-down, optional CIP
- Price
- From $45,000 USD with one filler
What a Baby Food Filling Machine Does, and Which Formats It Covers
A baby food filling machine takes a cooked, blended puree from a hopper, measures an exact portion into each container and closes it. Our SDH-R does that for one container family: pre-formed plastic cups and tubs, round, square or rectangular. On one indexing turret it places the empty cup, doses the puree with a servo piston, heat-seals film from a roll across the flange, and can flush nitrogen and press on a lid. See the full SDH-R product page.
It is a cup-and-tub machine for fresh and refrigerated baby and toddler food. It does not fill the spouted squeeze pouches many shoppers associate with baby food, or glass jars. For how purees behave in the hopper, read our baby food puree handling guide; this page is about choosing and configuring the machine.
What Baby Food Brands and Co-Packers Expect From a Puree Filling Machine
Infant portions are small, the buyers are parents who inspect every seal, and a typical range runs many flavors in short batches. That shapes what a puree filling machine has to deliver:
- Tight weights on small cups. At ±0.5%, a 4 oz cup holding about 113 g varies by roughly half a gram, and a 2 oz Stage 1 portion near 57 g by under a third of a gram, so you can target the declared net quantity instead of overfilling for safety.
- Smooth and textured stages on one frame. A suck-back nozzle stops thin purees tailing; large-bore valving passes soft pieces without crushing them.
- Visible tamper evidence. A heat-sealed membrane from roll film, plus an optional snap-on lid so a half-eaten cup can go back in the fridge.
- Fast recipe swaps. Saved HMI recipes and a flavor changeover under about 15 minutes keep short runs economical.
Small cups sit at the bottom of the fill range; our portion cup filling machine page covers 2 oz formats, and contract packers can read how a shared co-packer cup filling line is scheduled.
Baby Food Cup Filling Machine Setup by Stage and Recipe
Viscosity, piece size and acidity change from one stage to the next, so a baby food cup filling machine is configured around the hardest recipe in your range. Final nozzle, valve bore and stroke settings are confirmed on your own product.
Baby and toddler food types versus recommended SDH-R configuration
| Product | What makes it tricky | SDH-R setup |
|---|---|---|
| Stage 1 smooth fruit puree (pear, peach, apple) | Thin, sugary, strings and drips at cutoff | Servo piston, suck-back nozzle, slower end-of-stroke |
| Stage 1 root vegetable puree (carrot, sweet potato) | Starch thickens as it cools; low-acid | Piston, steady fill temperature, short hopper dwell |
| Stage 2 fruit and vegetable blends | Fiber from mango or leafy greens can sit on the flange | Suck-back nozzle centered over the cup, flange checks at start-up |
| Stage 3 textured purees with soft pieces | Pieces crushed or bridging in narrow valves | Large-bore valving; particle size confirmed in trials |
| Fruit and grain blends (oat, quinoa, rice) | Grain swells and viscosity drifts during a run | Piston with stroke tuned per recipe; optional weight checker |
| Toddler yogurt and fruit cups | Two layers, dairy allergen | Base piston plus second filler for the fruit layer |
| Toddler meals (pasta, rice or beans in sauce) | Mixed solids and sauce, uneven pieces | Large-bore valving or a custom engineered filler; confirm with engineering |
Single-fruit purees overlap with adult applesauce cups; our applesauce filling machine page covers that product in depth, and our yogurt filling machine page covers cultured dairy bases.
Smooth Purees: Tailing, Flange Contamination and Seal Quality
Why thin purees drip
A pear or peach puree can be thin enough to pour yet carry enough pectin to form a string as the nozzle pulls away, and that string lands on the flange. On an infant puree cup filler, a suck-back nozzle reverses a small volume at the end of each stroke so the product breaks inside the nozzle; we set nozzle height and suck-back timing at commissioning.
What sugar and fiber do to a seal
Under the seal head, sugar from fruit puree on a flange scorches and builds residue on the tooling, while fibers from mango or spinach blends lie across the sealing land and open a leak channel too narrow to see. Temperature, pressure and dwell are matched to your film and cup, but only a clean flange lets those settings work. Your QA team should still check seal strength through the shift.
Air and temperature
High-shear blending whips air into purees, and since the piston doses by volume, an aerated batch comes out light. Keep the hopper full to avoid a vortex, and add the optional weight checker so its feedback loop corrects drift. Starchy purees thicken as they cool, so a steady fill temperature keeps weights steady. Specify refrigerated product at a pumpable temperature; a warm-fill process needs its temperature checked by our engineers before we quote.
Get a configured SDH-R quote for your productSend your product, cup size and target cups per minute — we reply within 24 hours.
Request a quoteTextured Stages and Toddler Meals: Large-Bore Valving and Layered Fills
Stage 2 and Stage 3 recipes teach chewing, so the pieces have to arrive in the cup as pieces. Narrow valves and fast strokes shear soft carrot or pear dice into mush, while larger chunks can bridge a port and starve the next dose. Large-bore valving widens the flow path and the servo stroke can be slowed. Tell us your largest piece size so we can confirm it before quoting.
Toddler products are often layered: a yogurt base under fruit, or a grain blend topped with puree. With up to three fillers in one pass, a second piston or peristaltic pump places the second component and a garnish filler can add a topping your product team has judged safe for the age group. Our guide to multi-component and layered filling explains station sequencing.
Tamper-Evident Seals, Snap-On Lids and Lot Coding for Baby Food Cups
Parents read the seal as the safety signal. A membrane heat-sealed from roll film shows at a glance whether a cup has been opened, and a peelable film opens one-handed. Pre-die-cut lids suit a printed or shaped lid. As a toddler food cup sealing machine, the SDH-R can also place and snap on a plastic over-cap that protects the film in a diaper bag and covers an opened cup in the fridge.
Variable data coding devices print the lot code and date on each cup, and labeling equipment can add top and side labels. That lot code is what links your test results, complaints and any recall to a specific run.
Nitrogen MAP for Oxidation-Sensitive Purees
Fruit purees darken and lose flavor when oxygen trapped under the film keeps working on them, and oxygen also erodes vitamin C. Apple, pear and banana blends show it first. Flushing each cup with nitrogen, an option described on our MAP cup filler page, leaves 0.3-0.4% residual oxygen in the container and slows color and flavor drift.
Low oxygen is not automatically safer for baby food. Most vegetable purees are low-acid (pH above 4.6), and banana sits close to that line. Reduced-oxygen packaging of low-acid refrigerated food is a recognized hazard because non-proteolytic Clostridium botulinum can grow at refrigeration temperatures. On fresh dips and spreads, a typical 7-10 day refrigerated life often reaches 30-45+ days with nitrogen, depending on the product, but for infant purees the printed date must come from your process authority and your own shelf-life testing.
Some brands apply high-pressure processing (HPP) after sealing. We do not claim HPP compatibility: trapped gas compresses and stresses seals, so validate headspace, cup, film and seal with your HPP provider.
Hygiene and Allergen Control on a Baby Food Packaging Machine
A baby food packaging machine runs ready-to-eat product for the most vulnerable consumers, so cleanability weighs as much as speed. Every product-contact part is food-grade 304 stainless steel and strips down by hand, and the optional clean-in-place (CIP) system circulates wash solution through the product path. That supports the Listeria sanitation and environmental monitoring program your plant designs and verifies.
Allergens appear more often than buyers expect: milk in yogurt cups, wheat in pasta meals, and peanut or egg in early-introduction products. US law names nine major food allergens, sesame becoming the ninth on January 1, 2023, and Health Canada lists eleven priority allergens, among them mustard and sulphites.
- Run allergen-free recipes first after a full clean, allergen-containing ones last.
- Treat the under-15-minute changeover as a flavor swap within one allergen group; a validated allergen clean takes longer.
- Keep a saved HMI recipe for every SKU so weights and seal settings never carry over.
- Verify each allergen clean with testing under your written plan.
Regulatory Context: FDA Closer to Zero, FSMA and SFCR
FDA's Closer to Zero initiative, set out as an action plan in April 2021, works to reduce lead, arsenic, cadmium and mercury in foods for babies and young children. FDA's final guidance on lead in processed baby food, issued in January 2025, sets action levels of 10 ppb for fruits, most vegetables, mixtures, yogurts, custards and single-ingredient meats, and 20 ppb for single-ingredient root vegetables and dry infant cereals, and it names tubs alongside jars, pouches and boxes. FDA published draft cadmium guidance in October 2026 and targets 2027 for inorganic arsenic.
Those metals come from soil, water and ingredients, so supplier approval and testing control them, not the baby food filling machine. What the line adds is traceability: clean lot breaks at changeover and a lot code on every cup.
In the US, plants work under FSMA Preventive Controls in 21 CFR Part 117. Canadian facilities that manufacture or package food for export or for sale across provincial lines need a CFIA licence and a written preventive control plan. The SDH-R is built to support plants running these programs; compliance itself comes from your food safety team, not from equipment. Our certifications and compliance page documents its CE, UL and FDA-compliant food-contact materials.
When You Need a Different Baby Food Packaging Machine
Candor about fit saves a wasted trial. Look elsewhere if your plan includes:
- Spouted pouches or glass jars. This machine handles pre-formed cups and tubs, nothing else.
- Shelf-stable baby food. Retorted jars and aseptic packs need sterilization equipment; the SDH-R is not aseptic, retort or hot-fill rated.
- Frozen puree cubes or portions under 50 g. Both fall outside the standard range.
- A single flavor needed faster than 30 cups a minute. Volume like that suits an inline machine; our rotary versus inline comparison shows where each design wins.
Baby Food Filling Machine Price, Lead Time and Quote
Pricing for the SDH-R baby food filling machine begins at $45,000 USD in single-filler form; each extra filler, nitrogen MAP, CIP, lidding, coding, labeling, the weight checker and custom cup tooling raises the figure. Expect delivery 8-12 weeks after you confirm the order, backed by a 12-month warranty. Eight hours of run time at 18-25 cups a minute yields roughly 8,640 to 12,000 cups from a 44 by 52 inch frame; our capacity sizing guide checks that against demand.
Every machine is designed and built in Calgary, Alberta, and supported from our Alberta, New Jersey and California service centres. For a baby food quote, tell us each recipe and stage, the largest piece size, cup dimensions and fill weight, target speed and options. We may phone to learn more about the application, and usually reply within about 24 hours. Request a baby food filling machine quote, or reach sales@hummuspack.com and +1 (888) 922-7271 on weekdays between 9:00 AM and 5:00 PM MDT.
Sources and review
Every SDH-R figure on this page is checked line by line against the SDH-R engineering specification, as set out in our editorial policy. The regulatory and food-safety notes rely on these official sources, which we checked when this page was last updated:
- FDA: Closer to Zero, Reducing Childhood Exposure to Heavy Metals from Foods
- FDA Guidance: Action Levels for Lead in Processed Food Intended for Babies and Young Children
- eCFR: 21 CFR Part 117, Current Good Manufacturing Practice and Preventive Controls for Human Food
- CFIA: Food business activities that require a licence
- FDA: Food Allergies
- Health Canada: Common food allergens
Regulatory information here is general guidance, not legal advice; confirm your obligations with the authority or a qualified advisor. Spotted something out of date? Email sales@hummuspack.com or call +1 (888) 922-7271.
Baby Food Filling Machine — Frequently Asked Questions
Pricing for the Hummus Pack SDH-R baby food filling machine begins at $45,000 USD with one filler. Layered toddler cups need extra fillers, and nitrogen flushing, CIP, lids, lot coding, labels and custom cup tooling also raise the figure. Machines ship 8-12 weeks after order confirmation with a 12-month warranty. Share your recipes, cup sizes and speed target on our contact page for a configured quote.
No. The SDH-R works only with pre-formed plastic cups and tubs, round, square or rectangular, using matching change parts. Spouted squeeze pouches and glass jars need different machine types, and shelf-stable jarred baby food also needs retort or aseptic processing, which this machine does not provide. Refrigerated puree cups and toddler tubs are where it fits.
Yes for most programs. On a 4 oz cup holding about 113 g, ±0.5% on the SDH-R is roughly half a gram; on a 2 oz portion near 57 g it is under a third of a gram. Because the piston doses by volume, aerated puree can come out light, so the optional weight checker is sensible. Anything below 50 g is outside the standard range.
Usually, yes. Large-bore valving lets soft pieces through without crushing them, a slower servo stroke handles them gently, and as many as three fillers can build a layered toddler cup in one pass. Mixed meals with pasta, rice or beans are judged case by case: our engineers review piece size, viscosity and fill temperature before any quote.
Nitrogen flushing, an SDH-R option, lowers residual oxygen in each cup to 0.3-0.4%, so fruit purees brown more slowly and keep flavor and vitamin C longer. Low-acid vegetable purees in reduced-oxygen packs carry a Clostridium botulinum hazard that your process authority must evaluate. Set the date code from your own validation and shelf-life testing rather than a generic figure.
Indirectly. Lead, arsenic, cadmium and mercury come from soil, water and ingredients, so supplier approval and testing control them. The SDH-R contributes traceability: clean lot breaks at changeover and an optional coding device that prints a lot code on each cup, tying test results to specific runs. FDA set lead action levels for processed baby food in January 2025.
Neither is claimed. The SDH-R is designed for fresh and refrigerated purees handled at a pumpable temperature. Brands that run high-pressure processing after sealing should validate cup, film, seal and headspace with their HPP provider. If your process fills product warm, share the temperature with our engineering team so it can be confirmed before you receive a quote.
Cleanability starts with the build: food-grade 304 stainless, product-contact parts that come off by hand, an optional CIP system and one stored HMI recipe per SKU. A flavor swap inside one allergen group takes under about 15 minutes, while an allergen clean is longer and follows your validated procedure. Sequence allergen-free purees first after a full wash and confirm every clean with allergen testing.
Related machines & guides
Explore the pages most relevant to this application.
Why producers buy from Hummus Pack
Ready to Quote Your Baby Food Filling Machine?
Get a personalized SDH-R configuration and price for your product, cup sizes, and production volume.