Baby Food Filling Machine in Orlando
SDH-R automatic baby food filling, sealing & cupping for Orlando food producers. Servo-driven precision at 30 cups per minute — from $45,000 USD.
The Short Answer
Baby food filling machine in Orlando, FL: Hummus Pack's SDH-R is a fully automatic rotary machine that fills, seals and lids fruit and vegetable purée cups for refrigerated baby food. It runs up to 30 cups per minute (18 to 25 in production) and fills 50 to 500 g at ±0.5% with a roll-film seal. For Orlando producers, each machine is built in Calgary and delivered 8-12 weeks after order confirmation; support comes from our New Jersey service center, the nearest to Central Florida, under a 12-month warranty.
- SpeedUp to 30 cups/min (18–25 in production)
- Fill range50–500 g at ±0.5% accuracy
- Cup sizes4–16 oz standard; 2–32 oz custom
- PriceFrom $45,000 USD
- Lead time8–12 weeks from order
- Built inCalgary, Canada · 12-month warranty
Specifications checked against SDH-R engineering dataEditorial policyCertifications & compliance
Baby Food Packaging for Orlando Producers
Orlando is home to Central Florida prepared-foods and food-service co-packers. The SDH-R rotary baby food filling, sealing & cupping machine gives these producers a single, compact line that automates cup denesting, volumetric filling, membrane sealing, lidding, and optional nitrogen flushing — without the labour cost of manual packing.
Baby food is the most regulation-intensive category in cup-format food packaging. Every production run must meet the strictest hygiene standards, complete traceability from batch to individual cup, and allergen-control protocols that prevent cross-contamination. The SDH-R's 304 stainless steel construction, integrated CIP system, and PLC-based batch tracking deliver the compliance infrastructure that baby food producers require.
Baby Food Packaging in Orlando: What Local Producers Should Know
Orlando's food economy runs on volume. Theme parks, resorts, convention business and a busy restaurant scene create steady foodservice demand, while the growing suburbs of Central Florida feed retail grocery and club-store sales. Puerto Rican and wider Latin American communities, together with newcomers from around the world, favor dips, salsas, creamy spreads and yogurts. Commissaries and co-packers serving hotels, venues and grocers need portion-controlled cups that seal reliably and stack cleanly. Automatic cup filling replaces manual portioning where hourly labor is tight and consistency matters.
Orlando sits on I-4 and Florida's Turnpike, with Orlando International Airport adding air freight. Summer heat, humidity and afternoon thunderstorms put real demands on refrigerated trucking and dock handling. Oversight comes from FDA under FSMA Preventive Controls for Human Food (21 CFR Part 117) and from the Florida Department of Agriculture and Consumer Services. The SDH-R's optional nitrogen MAP flush and tamper-evident roll-film seal help extend refrigerated shelf life on longer runs across the peninsula.
Machine details: Baby food filling machine · SDH-R rotary cup filling and sealing machine: specs and price
Further reading: Food labeling requirements for dips and spreads · Types of food packaging machines · MAP and nitrogen flushing for dip shelf life
Selling Cup-Packed Foods in Orlando: Labels, Channels and Seasons
In Orlando, cup-packed foods are sold under English FDA labelling, and the visitor mix means clear icons, allergen statements and portion sizes matter as much as the words. Channels include supermarkets and independent grocers serving residents, plus a large foodservice side: resort kitchens, convention caterers, quick-service counters, hotel grab-and-go cases and delivery apps. Individual 2 to 4 oz portion cups suit breakfast buffets and snack boxes, while 8 to 16 oz tubs fit family shopping. Demand follows tourism, with spring break, summer holidays, Thanksgiving through New Year and big convention weeks lifting orders, plus summer barbecues and game-day parties for locals. Producers here often run many SKUs in modest batches. The SDH-R recipe storage and changeover of under about 15 minutes suit that rhythm, and top or side labelling integration is available as an option.
| Starting price | From $45,000 USD (single-filler configuration) |
|---|---|
| Lead time | 8–12 weeks from order confirmation |
| Warranty | 12 months |
| Nearest support | New Jersey service center |
| Label language | English |
| Real-world output | 18–25 cups per minute (30 dry-cycle maximum) |
Launch checklist for fresh baby food purée cups
The SDH-R targets fresh, refrigerated purées filled at a pumpable temperature, so it is not an aseptic or retort system. Be clear about that when planning your product and shelf-life claims. Allergens need careful attention, since purées may include milk, nuts or wheat. Check your market's allergen list and any rules for infant products before artwork is finalized. Our engineering team can confirm whether your product, fill temperature and portion size suit the machine before quoting.
- Confirm the product is a refrigerated purée and share fill temperature and texture.
- Check infant-product labeling and allergen rules for your market before artwork.
- Confirm portion size is at or above 50 g, or discuss options early.
- Validate seal integrity and flange cleanliness on small cups before production.
- Run shelf-life trials with and without nitrogen MAP, then set date codes.
Official references: FDA Preventive Controls for Human Food · FDA food labeling guidance
Safety-First Design for Infant Nutrition
Pharma-Grade Hygiene
Full 304 stainless steel with electropolished product-contact surfaces. CIP system cleans to dairy-grade standards. Tool-free disassembly for visual inspection.
Allergen Changeover Protocol
Complete strip-down and CIP wash between allergen groups. PLC prompts operator through validated changeover steps to prevent cross-contamination.
Batch Traceability
PLC logs batch number, fill weights, seal integrity, and timestamp for every production run. Exportable data supports HACCP and regulatory audit trails.
Gentle Purée Handling
Servo piston fills smooth purées and chunky textured meals without air incorporation. Consistent fill weights ±0.5% meet the tight tolerances required for infant portion sizes.
SDH-R Configuration for Baby Food
Delivery & Service to Orlando
Florida producers are served through our New Jersey service center, with freight delivery from Calgary typically arriving in 4–6 weeks via Gulf or East Coast ports. On-site commissioning and remote PLC support are included.
Baby Food Products We Fill for Orlando Brands
How the SDH-R Fills Baby Food in Orlando
Fully automatic process — no manual labour required
Cup Denesting
Empty cups are automatically separated from a nested stack and placed into the rotary table carriers. The pneumatic denester handles round, square, and rectangular cups from 2oz to 32oz — standard formats for baby food brands in Orlando.
Servo-Driven Filling
The volumetric piston filler draws a precise dose of baby food and dispenses it into the cup. Servo control adjusts stroke length and speed per recipe, holding ±0.5% fill-weight accuracy across every run for Orlando retail compliance.
Membrane Heat Sealing
Roll-stock film is drawn across the filled cup and heat-sealed to create a tamper-evident, airtight membrane. Temperature, pressure, and dwell time are individually controlled to match your specific film and cup material.
Snap-On Lid (Optional)
A pick-and-place mechanism applies a consumer-friendly snap-on lid over the membrane seal. This two-barrier system provides tamper evidence and reclosability — the standard expected by grocery retailers.
MAP Nitrogen Flush (Optional)
Modified Atmosphere Packaging replaces oxygen with food-grade nitrogen before sealing. For baby food, this extends refrigerated shelf life from 7–10 days to 30–45+ days — essential for distribution across Orlando and beyond.
More Filling Applications in Orlando
Other products the SDH-R fills for Orlando producers
Baby Food Filling Machine FAQs: Orlando
How much does a baby food filling machine cost in Orlando?
Baby food purée cup filling on the SDH-R starts at $45,000 USD for the single-filler configuration, for fresh and refrigerated products. Nitrogen MAP, additional fillers, labeling and variable data coding, and custom tooling raise the price. Send your purée type, cup size, target speed and options, and the team replies with a quote within about 24 hours.
How is the SDH-R delivered and serviced in Orlando?
Each SDH-R is built in Calgary before it ships, with an 8-12 week lead time from order confirmation. Orlando producers are supported from our New Jersey service center, the nearest to Central Florida. The machine carries a 12-month warranty, and quote requests get a reply within about 24 hours.
Need a Baby Food Filling Machine in Orlando?
Get a personalized SDH-R quote for baby food packaging in Orlando. From $45,000 USD with a 12-month warranty and dedicated service support.