Baby Food Filling Machine in Tampa
SDH-R automatic baby food filling, sealing & cupping for Tampa food producers. Servo-driven precision at 30 cups per minute — from $45,000 USD.
The Short Answer
Baby food filling machine in Tampa, FL: Hummus Pack's SDH-R is a fully automatic rotary machine that fills, seals and lids fruit and vegetable purée cups for refrigerated baby food. It runs up to 30 cups per minute (18 to 25 in production) and fills 50 to 500 g at ±0.5% with a roll-film seal. Tampa Bay producers receive a machine built in Calgary with an 8-12 week lead time, a 12-month warranty and support from our nearest location to Florida, the New Jersey service center.
- SpeedUp to 30 cups/min (18–25 in production)
- Fill range50–500 g at ±0.5% accuracy
- Cup sizes4–16 oz standard; 2–32 oz custom
- PriceFrom $45,000 USD
- Lead time8–12 weeks from order
- Built inCalgary, Canada · 12-month warranty
Specifications checked against SDH-R engineering dataEditorial policyCertifications & compliance
Baby Food Packaging for Tampa Producers
Tampa is home to Tampa Bay specialty-condiment and dip manufacturers. The SDH-R rotary baby food filling, sealing & cupping machine gives these producers a single, compact line that automates cup denesting, volumetric filling, membrane sealing, lidding, and optional nitrogen flushing — without the labour cost of manual packing.
Baby food is the most regulation-intensive category in cup-format food packaging. Every production run must meet the strictest hygiene standards, complete traceability from batch to individual cup, and allergen-control protocols that prevent cross-contamination. The SDH-R's 304 stainless steel construction, integrated CIP system, and PLC-based batch tracking deliver the compliance infrastructure that baby food producers require.
Baby Food Packaging in Tampa: What Local Producers Should Know
Tampa Bay's food heritage is layered. Ybor City grew around Cuban, Spanish and Italian immigrants, Tarpon Springs carries a Greek tradition that shapes its sponge docks and restaurants, and the wider region is home to growing Latin American and Middle Eastern communities. Strawberry fields around Plant City supply fresh produce, and the port and I-4 corridor give makers of dips, sauces, dairy and plant-based foods a base for regional distribution. Grocers, restaurants and the area's many visitors all buy cup-packed fresh foods, and automatic filling helps small and mid-sized producers scale without adding hand-fill shifts.
Port Tampa Bay, Tampa International Airport, and the I-4, I-75 and I-275 corridors make the area a base for moving chilled goods along the Gulf Coast. Warm, humid weather keeps refrigerated trailers working most of the year, and hurricane season calls for contingency planning. Compliance centers on 21 CFR Part 117, FDA's FSMA Preventive Controls for Human Food, plus the Florida Department of Agriculture and Consumer Services. The SDH-R's food-grade 304 stainless steel and optional CIP system support sanitation.
Machine details: Baby food filling machine · SDH-R rotary cup filling and sealing machine: specs and price
Further reading: Food labeling requirements for dips and spreads · Types of food packaging machines · MAP and nitrogen flushing for dip shelf life
Selling Cup-Packed Foods in Tampa: Labels, Channels and Seasons
Tampa Bay producers label cups and tubs in English as FDA requires, and the area's Cuban, Greek and wider Mediterranean food traditions give dips, spreads and yogurt cups a natural audience. Retail runs through supermarket chains, independent and ethnic grocers, delis, bakeries and cafes, with caterers, hospitality venues and delivery apps filling out foodservice. Cold-chain handling matters in coastal heat, so tamper-evident seals and clear date coding earn trust on the shelf. Seasonal peaks include outdoor-living months from late spring through summer, football-season tailgating, the winter visitor season and holiday entertaining. Many local brands start small and add flavours quickly. The SDH-R can store recipes on its HMI and change over between SKUs in under about 15 minutes, and its variable data coding option supports lot and date marking on each cup.
| Starting price | From $45,000 USD (single-filler configuration) |
|---|---|
| Lead time | 8–12 weeks from order confirmation |
| Warranty | 12 months |
| Nearest support | New Jersey service center |
| Label language | English |
| Real-world output | 18–25 cups per minute (30 dry-cycle maximum) |
Launch checklist for fresh baby food purée cups
The SDH-R targets fresh, refrigerated purées filled at a pumpable temperature, so it is not an aseptic or retort system. Be clear about that when planning your product and shelf-life claims. Allergens need careful attention, since purées may include milk, nuts or wheat. Check your market's allergen list and any rules for infant products before artwork is finalized. Our engineering team can confirm whether your product, fill temperature and portion size suit the machine before quoting.
- Confirm the product is a refrigerated purée and share fill temperature and texture.
- Check infant-product labeling and allergen rules for your market before artwork.
- Confirm portion size is at or above 50 g, or discuss options early.
- Validate seal integrity and flange cleanliness on small cups before production.
- Run shelf-life trials with and without nitrogen MAP, then set date codes.
Official references: FDA Preventive Controls for Human Food · FDA food labeling guidance
Safety-First Design for Infant Nutrition
Pharma-Grade Hygiene
Full 304 stainless steel with electropolished product-contact surfaces. CIP system cleans to dairy-grade standards. Tool-free disassembly for visual inspection.
Allergen Changeover Protocol
Complete strip-down and CIP wash between allergen groups. PLC prompts operator through validated changeover steps to prevent cross-contamination.
Batch Traceability
PLC logs batch number, fill weights, seal integrity, and timestamp for every production run. Exportable data supports HACCP and regulatory audit trails.
Gentle Purée Handling
Servo piston fills smooth purées and chunky textured meals without air incorporation. Consistent fill weights ±0.5% meet the tight tolerances required for infant portion sizes.
SDH-R Configuration for Baby Food
Delivery & Service to Tampa
Florida producers are served through our New Jersey service center, with freight delivery from Calgary typically arriving in 4–6 weeks via Gulf or East Coast ports. On-site commissioning and remote PLC support are included.
Baby Food Products We Fill for Tampa Brands
How the SDH-R Fills Baby Food in Tampa
Fully automatic process — no manual labour required
Cup Denesting
Empty cups are automatically separated from a nested stack and placed into the rotary table carriers. The pneumatic denester handles round, square, and rectangular cups from 2oz to 32oz — standard formats for baby food brands in Tampa.
Servo-Driven Filling
The volumetric piston filler draws a precise dose of baby food and dispenses it into the cup. Servo control adjusts stroke length and speed per recipe, holding ±0.5% fill-weight accuracy across every run for Tampa retail compliance.
Membrane Heat Sealing
Roll-stock film is drawn across the filled cup and heat-sealed to create a tamper-evident, airtight membrane. Temperature, pressure, and dwell time are individually controlled to match your specific film and cup material.
Snap-On Lid (Optional)
A pick-and-place mechanism applies a consumer-friendly snap-on lid over the membrane seal. This two-barrier system provides tamper evidence and reclosability — the standard expected by grocery retailers.
MAP Nitrogen Flush (Optional)
Modified Atmosphere Packaging replaces oxygen with food-grade nitrogen before sealing. For baby food, this extends refrigerated shelf life from 7–10 days to 30–45+ days — essential for distribution across Tampa and beyond.
More Filling Applications in Tampa
Other products the SDH-R fills for Tampa producers
Baby Food Filling Machine FAQs: Tampa
How much does a baby food filling machine cost in Tampa?
Baby food purée cup filling on the SDH-R starts at $45,000 USD for the single-filler configuration, for fresh and refrigerated products. Nitrogen MAP, additional fillers, labeling and variable data coding, and custom tooling raise the price. Send your purée type, cup size, target speed and options, and the team replies with a quote within about 24 hours.
How is the SDH-R delivered and serviced in Tampa?
We build the SDH-R in Calgary and deliver 8-12 weeks after order confirmation. For Tampa Bay customers, support comes from our New Jersey service center, the nearest to Florida. A 12-month warranty applies, and we normally reply to quote requests within about 24 hours.
Need a Baby Food Filling Machine in Tampa?
Get a personalized SDH-R quote for baby food packaging in Tampa. From $45,000 USD with a 12-month warranty and dedicated service support.