Calgary, AlbertaBaby Food

Baby Food Filling Machine in Calgary

SDH-R automatic baby food filling, sealing & cupping for Calgary food producers. Servo-driven precision at 30 cups per minute — from $45,000 USD.

The Short Answer

Baby food filling machine in Calgary, AB: For fresh baby food purées, the SDH-R fills pre-formed cups in one rotary pass, then closes them with heat-sealed roll film and an optional snap-on lid. It is not an aseptic or retort system, so it suits refrigerated purées and products treated after sealing. For Calgary producers, the SDH-R is built right here in the city, with an 8-12 week lead time from order confirmation. Support comes from our Calgary headquarters and Alberta service centre, factory-direct, with no import duties.

  • SpeedUp to 30 cups/min (18–25 in production)
  • Fill range50–500 g at ±0.5% accuracy
  • Cup sizes4–16 oz standard; 2–32 oz custom
  • PriceFrom $45,000 USD
  • Lead time8–12 weeks from order
  • Built inCalgary, Canada · 12-month warranty

Specifications checked against SDH-R engineering dataEditorial policyCertifications & compliance

Baby Food Packaging for Calgary Producers

Calgary is home to our home market — direct factory access for Calgary hummus, dip, and prepared-food producers. The SDH-R rotary baby food filling, sealing & cupping machine gives these producers a single, compact line that automates cup denesting, volumetric filling, membrane sealing, lidding, and optional nitrogen flushing — without the labour cost of manual packing.

Baby food is the most regulation-intensive category in cup-format food packaging. Every production run must meet the strictest hygiene standards, complete traceability from batch to individual cup, and allergen-control protocols that prevent cross-contamination. The SDH-R's 304 stainless steel construction, integrated CIP system, and PLC-based batch tracking deliver the compliance infrastructure that baby food producers require.

Local guide

Baby Food Packaging in Calgary: What Local Producers Should Know

Calgary's food economy draws on Alberta beef, canola, pulses and dairy, and on a city whose population has grown through migration from across Canada and abroad. Large South Asian, Filipino, Chinese, Middle Eastern and Latin American communities, a busy farmers' market culture, a strong restaurant scene and Stampede-season tourism create demand for fresh dips, sauces, dairy and ready-to-eat cups. Local brands that outgrow hand-filling at market scale can use automation to supply grocery chains and foodservice distributors with consistent portions.

Calgary sits on the Trans-Canada and Queen Elizabeth II highways, with an international airport and rail links east and west. Chinook winds swing winter temperatures quickly, so chilled loads need steady cold-chain control. Alberta Health Services oversees food premises here, and interprovincial or export sales need a CFIA Safe Food for Canadians licence. Our team builds the SDH-R at 4049 74 Ave SE; call +1 (888) 922-7271, Monday to Friday, 9:00 AM to 5:00 PM MDT.

Machine details: Baby food filling machine · SDH-R rotary cup filling and sealing machine: specs and price

Further reading: Food labeling requirements for dips and spreads · Types of food packaging machines · MAP and nitrogen flushing for dip shelf life

Market notes

Selling Cup-Packed Foods in Calgary: Labels, Channels and Seasons

In Calgary, fresh cups of dips, spreads and dairy are labelled in English and French for prepackaged sale, and local shoppers favour brands that can point to Alberta ingredients and a Canadian-made origin. The channel mix covers supermarket chains, independent and ethnic grocers across the northeast and south, delis, cafes, caterers serving oil and gas and event clients, university and hospital foodservice, and delivery apps. Stampede in July and the summer barbecue season anchor the peak, with ski-season tourism toward Banff and Canmore, holiday entertaining, and the September return to school and campus adding more. Because the team is local, producers can discuss cup sizes and flavours directly. The SDH-R changes recipes in under 15 minutes for short runs of many SKUs and label versions, and optional nitrogen MAP supports longer refrigerated distribution.

Planning snapshot
Starting priceFrom $45,000 USD (single-filler configuration)
Lead time8–12 weeks from order confirmation
Warranty12 months
Nearest supportCalgary HQ and Alberta service centre
Label languageEnglish and French
Real-world output18–25 cups per minute (30 dry-cycle maximum)

Launch checklist for fresh baby food purée cups

Small portions are typical here. Fills start at 50 g, and 2 oz portion cups sit at the low end of the range, so confirm the exact portion with the engineering team. Seal integrity and a clean flange matter for a product that families will open at home. Nitrogen MAP can extend refrigerated life, and your own shelf-life trials should confirm the date. Always check date coding and labeling requirements for infant products with your market's regulator.

  • Confirm the product is a refrigerated purée and share fill temperature and texture.
  • Check infant-product labeling and allergen rules for your market before artwork.
  • Confirm portion size is at or above 50 g, or discuss options early.
  • Validate seal integrity and flange cleanliness on small cups before production.
  • Run shelf-life trials with and without nitrogen MAP, then set date codes.

Official references: CFIA food licences (SFCR) · CFIA labelling requirements

Purpose-Built for Baby Food

Safety-First Design for Infant Nutrition

Pharma-Grade Hygiene

Full 304 stainless steel with electropolished product-contact surfaces. CIP system cleans to dairy-grade standards. Tool-free disassembly for visual inspection.

Allergen Changeover Protocol

Complete strip-down and CIP wash between allergen groups. PLC prompts operator through validated changeover steps to prevent cross-contamination.

Batch Traceability

PLC logs batch number, fill weights, seal integrity, and timestamp for every production run. Exportable data supports HACCP and regulatory audit trails.

Gentle Purée Handling

Servo piston fills smooth purées and chunky textured meals without air incorporation. Consistent fill weights ±0.5% meet the tight tolerances required for infant portion sizes.

Specifications

SDH-R Configuration for Baby Food

Throughput30 cups/min (dry cycle)
Fill Range50g – 250g (2oz – 9oz)
Surfaces304 SS, electropolished
TraceabilityPLC batch logging
HygieneCIP, HACCP, allergen-safe
CertificationsCE, FDA, UL

Delivery & Service to Calgary

Alberta customers have direct factory access at 4049 74 Ave SE, Calgary. Same-day spare parts, in-person training, factory visits, and on-site commissioning are standard. No freight charges for Calgary-area pickup.

Starting at $45,000 USD with a 12-month warranty. Made in Calgary, Alberta, Canada and shipped to Calgary.
Hummus Pack HQ — 4049 74 Ave SE, Calgary
Direct factory access and same-day parts
Zero freight for local pickup
Visit our facility before purchasing
Baby Food Varieties

Baby Food Products We Fill for Calgary Brands

Fruit purées
Vegetable purées
Mixed fruit & veg meals
Organic baby food
Stage 1 smooth purées
Stage 2 textured meals
Toddler snack cups
Baby yogurt
Baby cereal cups

How the SDH-R Fills Baby Food in Calgary

Fully automatic process — no manual labour required

1

Cup Denesting

Empty cups are automatically separated from a nested stack and placed into the rotary table carriers. The pneumatic denester handles round, square, and rectangular cups from 2oz to 32oz — standard formats for baby food brands in Calgary.

2

Servo-Driven Filling

The volumetric piston filler draws a precise dose of baby food and dispenses it into the cup. Servo control adjusts stroke length and speed per recipe, holding ±0.5% fill-weight accuracy across every run for Calgary retail compliance.

3

Membrane Heat Sealing

Roll-stock film is drawn across the filled cup and heat-sealed to create a tamper-evident, airtight membrane. Temperature, pressure, and dwell time are individually controlled to match your specific film and cup material.

4

Snap-On Lid (Optional)

A pick-and-place mechanism applies a consumer-friendly snap-on lid over the membrane seal. This two-barrier system provides tamper evidence and reclosability — the standard expected by grocery retailers.

5

MAP Nitrogen Flush (Optional)

Modified Atmosphere Packaging replaces oxygen with food-grade nitrogen before sealing. For baby food, this extends refrigerated shelf life from 7–10 days to 30–45+ days — essential for distribution across Calgary and beyond.

Compliance & Certifications: Every SDH-R machine ships with CE, FDA, and UL documentation. The 304 stainless-steel construction meets HACCP and BRCGS standards — ensuring your baby food packaging meets the regulatory requirements that Calgary retailers and distributors demand.

Baby Food Filling Machines in Nearby Cities

We also supply baby food packaging lines across Alberta

Baby Food Filling Machine FAQs: Calgary

How much does a baby food filling machine cost in Calgary?

Baby food purée cup filling on the SDH-R starts at $45,000 USD for the single-filler configuration, for fresh and refrigerated products. Nitrogen MAP, additional fillers, labeling and variable data coding, and custom tooling raise the price. Send your purée type, cup size, target speed and options, and the team replies with a quote within about 24 hours.

How is the SDH-R delivered and serviced in Calgary?

The SDH-R is built right here in Calgary, with an 8-12 week lead time from order confirmation. Local customers are supported by our Calgary headquarters and Alberta service centre. A 12-month warranty applies, and we reply to quote requests within about 24 hours, Monday to Friday.

Need a Baby Food Filling Machine in Calgary?

Get a personalized SDH-R quote for baby food packaging in Calgary. From $45,000 USD with a 12-month warranty and dedicated service support.