Edmonton, AlbertaBaby Food

Baby Food Filling Machine in Edmonton

SDH-R automatic baby food filling, sealing & cupping for Edmonton food producers. Servo-driven precision at 30 cups per minute — from $45,000 USD.

The Short Answer

Baby food filling machine in Edmonton, AB: Hummus Pack's SDH-R is a fully automatic rotary machine that fills, seals and lids fruit and vegetable purée cups for refrigerated baby food. It runs up to 30 cups per minute (18 to 25 in production) and fills 50 to 500 g at ±0.5% with a roll-film seal. In Edmonton, the SDH-R is built in Calgary and delivered on an 8-12 week lead time from order confirmation. Northern Alberta customers are supported from our Calgary headquarters and Alberta service centre, factory-direct, with no import duties.

  • SpeedUp to 30 cups/min (18–25 in production)
  • Fill range50–500 g at ±0.5% accuracy
  • Cup sizes4–16 oz standard; 2–32 oz custom
  • PriceFrom $45,000 USD
  • Lead time8–12 weeks from order
  • Built inCalgary, Canada · 12-month warranty

Specifications checked against SDH-R engineering dataEditorial policyCertifications & compliance

Baby Food Packaging for Edmonton Producers

Edmonton is home to Edmonton co-packers and Alberta dairy-dip manufacturers. The SDH-R rotary baby food filling, sealing & cupping machine gives these producers a single, compact line that automates cup denesting, volumetric filling, membrane sealing, lidding, and optional nitrogen flushing — without the labour cost of manual packing.

Baby food is the most regulation-intensive category in cup-format food packaging. Every production run must meet the strictest hygiene standards, complete traceability from batch to individual cup, and allergen-control protocols that prevent cross-contamination. The SDH-R's 304 stainless steel construction, integrated CIP system, and PLC-based batch tracking deliver the compliance infrastructure that baby food producers require.

Local guide

Baby Food Packaging in Edmonton: What Local Producers Should Know

Edmonton, Alberta's capital, sits at the centre of a northern prairie farm belt producing grain, canola, oats, barley and dairy, and is a base for processors serving northern Alberta and the oil-sands region. Its Ukrainian roots, long-established Arab community and large Filipino, South Asian and Chinese populations support wide demand for dips, dairy, sauces and specialty fresh foods, alongside farmers' markets, universities and a large government and hospital workforce. Producers here face tight labour, which makes automated cup filling a practical way to expand.

Edmonton is the gateway to Alberta's north: the Yellowhead Highway runs east and west, Highway 2 runs south to Calgary, and roads lead north to Grande Prairie and Fort McMurray. Edmonton International Airport handles air cargo. Winters are long and can drop far below freezing. Alberta Health Services oversees food premises, and interprovincial or export sales need a CFIA Safe Food for Canadians licence. The SDH-R's tamper-evident roll-film seal and optional MAP suit chilled cups on longer northern routes.

Machine details: Baby food filling machine · SDH-R rotary cup filling and sealing machine: specs and price

Further reading: Food labeling requirements for dips and spreads · Types of food packaging machines · MAP and nitrogen flushing for dip shelf life

Market notes

Selling Cup-Packed Foods in Edmonton: Labels, Channels and Seasons

Edmonton producers label prepackaged cups in English and French, and sell into a city with a large university and hospital base, many festivals and strong ethnic grocery communities including Ukrainian, Filipino, Middle Eastern and South Asian shoppers. Channels include supermarket chains, independent grocers, farmers' markets, delis, cafes, caterers serving events and industrial camps, institutional foodservice, and delivery apps. The festival summer, with barbecue and patio season, is the main peak; the winter holidays bring a second, and September's campus return lifts single-serve lunch cups. As the gateway to northern Alberta, the city supplies stores and camps with long cold-chain runs, so extra shelf life is valuable. The SDH-R's changeover in under 15 minutes keeps multiple flavours and label versions practical, and optional nitrogen MAP helps keep cups fresh through longer northern distribution.

Planning snapshot
Starting priceFrom $45,000 USD (single-filler configuration)
Lead time8–12 weeks from order confirmation
Warranty12 months
Nearest supportCalgary HQ and Alberta service centre
Label languageEnglish and French
Real-world output18–25 cups per minute (30 dry-cycle maximum)

Launch checklist for fresh baby food purée cups

Small portions are typical here. Fills start at 50 g, and 2 oz portion cups sit at the low end of the range, so confirm the exact portion with the engineering team. Seal integrity and a clean flange matter for a product that families will open at home. Nitrogen MAP can extend refrigerated life, and your own shelf-life trials should confirm the date. Always check date coding and labeling requirements for infant products with your market's regulator.

  • Confirm the product is a refrigerated purée and share fill temperature and texture.
  • Check infant-product labeling and allergen rules for your market before artwork.
  • Confirm portion size is at or above 50 g, or discuss options early.
  • Validate seal integrity and flange cleanliness on small cups before production.
  • Run shelf-life trials with and without nitrogen MAP, then set date codes.

Official references: CFIA food licences (SFCR) · CFIA labelling requirements

Purpose-Built for Baby Food

Safety-First Design for Infant Nutrition

Pharma-Grade Hygiene

Full 304 stainless steel with electropolished product-contact surfaces. CIP system cleans to dairy-grade standards. Tool-free disassembly for visual inspection.

Allergen Changeover Protocol

Complete strip-down and CIP wash between allergen groups. PLC prompts operator through validated changeover steps to prevent cross-contamination.

Batch Traceability

PLC logs batch number, fill weights, seal integrity, and timestamp for every production run. Exportable data supports HACCP and regulatory audit trails.

Gentle Purée Handling

Servo piston fills smooth purées and chunky textured meals without air incorporation. Consistent fill weights ±0.5% meet the tight tolerances required for infant portion sizes.

Specifications

SDH-R Configuration for Baby Food

Throughput30 cups/min (dry cycle)
Fill Range50g – 250g (2oz – 9oz)
Surfaces304 SS, electropolished
TraceabilityPLC batch logging
HygieneCIP, HACCP, allergen-safe
CertificationsCE, FDA, UL

Delivery & Service to Edmonton

Alberta customers have direct factory access at 4049 74 Ave SE, Calgary. Same-day spare parts, in-person training, factory visits, and on-site commissioning are standard. No freight charges for Calgary-area pickup.

Starting at $45,000 USD with a 12-month warranty. Made in Calgary, Alberta, Canada and shipped to Edmonton.
Hummus Pack HQ — 4049 74 Ave SE, Calgary
Direct factory access and same-day parts
Zero freight for local pickup
Visit our facility before purchasing
Baby Food Varieties

Baby Food Products We Fill for Edmonton Brands

Fruit purées
Vegetable purées
Mixed fruit & veg meals
Organic baby food
Stage 1 smooth purées
Stage 2 textured meals
Toddler snack cups
Baby yogurt
Baby cereal cups

How the SDH-R Fills Baby Food in Edmonton

Fully automatic process — no manual labour required

1

Cup Denesting

Empty cups are automatically separated from a nested stack and placed into the rotary table carriers. The pneumatic denester handles round, square, and rectangular cups from 2oz to 32oz — standard formats for baby food brands in Edmonton.

2

Servo-Driven Filling

The volumetric piston filler draws a precise dose of baby food and dispenses it into the cup. Servo control adjusts stroke length and speed per recipe, holding ±0.5% fill-weight accuracy across every run for Edmonton retail compliance.

3

Membrane Heat Sealing

Roll-stock film is drawn across the filled cup and heat-sealed to create a tamper-evident, airtight membrane. Temperature, pressure, and dwell time are individually controlled to match your specific film and cup material.

4

Snap-On Lid (Optional)

A pick-and-place mechanism applies a consumer-friendly snap-on lid over the membrane seal. This two-barrier system provides tamper evidence and reclosability — the standard expected by grocery retailers.

5

MAP Nitrogen Flush (Optional)

Modified Atmosphere Packaging replaces oxygen with food-grade nitrogen before sealing. For baby food, this extends refrigerated shelf life from 7–10 days to 30–45+ days — essential for distribution across Edmonton and beyond.

Compliance & Certifications: Every SDH-R machine ships with CE, FDA, and UL documentation. The 304 stainless-steel construction meets HACCP and BRCGS standards — ensuring your baby food packaging meets the regulatory requirements that Edmonton retailers and distributors demand.

Baby Food Filling Machines in Nearby Cities

We also supply baby food packaging lines across Alberta

Baby Food Filling Machine FAQs: Edmonton

How much does a baby food filling machine cost in Edmonton?

Baby food purée cup filling on the SDH-R starts at $45,000 USD for the single-filler configuration, for fresh and refrigerated products. Nitrogen MAP, additional fillers, labeling and variable data coding, and custom tooling raise the price. Send your purée type, cup size, target speed and options, and the team replies with a quote within about 24 hours.

How is the SDH-R delivered and serviced in Edmonton?

We build the SDH-R in Calgary and deliver to Edmonton 8-12 weeks after order confirmation. Support for Edmonton and northern Alberta customers comes from our Calgary headquarters and Alberta service centre, factory-direct with no import duties. It carries a 12-month warranty, and we answer quote requests in about 24 hours.

Need a Baby Food Filling Machine in Edmonton?

Get a personalized SDH-R quote for baby food packaging in Edmonton. From $45,000 USD with a 12-month warranty and dedicated service support.