Red Deer, AlbertaBaby Food

Baby Food Filling Machine in Red Deer

SDH-R automatic baby food filling, sealing & cupping for Red Deer food producers. Servo-driven precision at 30 cups per minute — from $45,000 USD.

The Short Answer

Baby food filling machine in Red Deer, AB: Hummus Pack's SDH-R is a fully automatic rotary machine that fills, seals and lids fruit and vegetable purée cups for refrigerated baby food. It runs up to 30 cups per minute (18 to 25 in production) and fills 50 to 500 g at ±0.5% with a roll-film seal. For Red Deer producers, the SDH-R is built in Calgary, along the Highway 2 corridor, with an 8-12 week lead time from order confirmation. Support comes from our Calgary headquarters and Alberta service centre, factory-direct, with no import duties.

  • SpeedUp to 30 cups/min (18–25 in production)
  • Fill range50–500 g at ±0.5% accuracy
  • Cup sizes4–16 oz standard; 2–32 oz custom
  • PriceFrom $45,000 USD
  • Lead time8–12 weeks from order
  • Built inCalgary, Canada · 12-month warranty

Specifications checked against SDH-R engineering dataEditorial policyCertifications & compliance

Baby Food Packaging for Red Deer Producers

Red Deer is home to central-Alberta food processors midway between Calgary and Edmonton. The SDH-R rotary baby food filling, sealing & cupping machine gives these producers a single, compact line that automates cup denesting, volumetric filling, membrane sealing, lidding, and optional nitrogen flushing — without the labour cost of manual packing.

Baby food is the most regulation-intensive category in cup-format food packaging. Every production run must meet the strictest hygiene standards, complete traceability from batch to individual cup, and allergen-control protocols that prevent cross-contamination. The SDH-R's 304 stainless steel construction, integrated CIP system, and PLC-based batch tracking deliver the compliance infrastructure that baby food producers require.

Local guide

Baby Food Packaging in Red Deer: What Local Producers Should Know

Red Deer sits midway on the Calgary-Edmonton corridor and serves central Alberta's farm and ranch country: cattle, grain, canola, hogs and dairy, with a growing number of small processors. Producers here often sell to both Calgary and Edmonton shoppers as well as local grocers, farmers' markets and regional foodservice. Rural labour pools are limited and small teams carry a lot of work, so automating the fill, seal and lid steps lets a central Alberta food business grow without a large crew.

Red Deer is on Highway 2 between Calgary and Edmonton, with Highway 11 running west toward Rocky Mountain House, so loads can reach both big cities by road. Winter storms can slow highway travel, and refrigerated trucks need reliable cold-chain control. Alberta Health Services oversees food premises, and cups sold to other provinces or abroad need a CFIA Safe Food for Canadians licence. The SDH-R's 304 stainless build and tool-free strip-down suit small plants that clean down often.

Machine details: Baby food filling machine · SDH-R rotary cup filling and sealing machine: specs and price

Further reading: Food labeling requirements for dips and spreads · Types of food packaging machines · MAP and nitrogen flushing for dip shelf life

Market notes

Selling Cup-Packed Foods in Red Deer: Labels, Channels and Seasons

Red Deer sits midway between Calgary and Edmonton, so a producer here can serve both metropolitan markets and the central Alberta towns around it, all with English and French on the label of prepackaged cups. Buyers include regional supermarket chains, independent and co-operative grocers, farmers' markets, delis, cafes, caterers serving farm and community events, college foodservice, and delivery apps. Summer barbecue, fair and rodeo season leads demand, with holiday entertaining and back-to-school following, while ski traffic and winter travel along the highway corridor add grab-and-go sales. Smaller-batch makers often switch between a handful of flavours and sizes for different customers. The SDH-R's recipe changeover in under 15 minutes suits that rhythm, with label versions swapped quickly, and optional nitrogen MAP supports deliveries to both cities and beyond.

Planning snapshot
Starting priceFrom $45,000 USD (single-filler configuration)
Lead time8–12 weeks from order confirmation
Warranty12 months
Nearest supportCalgary HQ and Alberta service centre
Label languageEnglish and French
Real-world output18–25 cups per minute (30 dry-cycle maximum)

Launch checklist for fresh baby food purée cups

Small portions are typical here. Fills start at 50 g, and 2 oz portion cups sit at the low end of the range, so confirm the exact portion with the engineering team. Seal integrity and a clean flange matter for a product that families will open at home. Nitrogen MAP can extend refrigerated life, and your own shelf-life trials should confirm the date. Always check date coding and labeling requirements for infant products with your market's regulator.

  • Confirm the product is a refrigerated purée and share fill temperature and texture.
  • Check infant-product labeling and allergen rules for your market before artwork.
  • Confirm portion size is at or above 50 g, or discuss options early.
  • Validate seal integrity and flange cleanliness on small cups before production.
  • Run shelf-life trials with and without nitrogen MAP, then set date codes.

Official references: CFIA food licences (SFCR) · CFIA labelling requirements

Purpose-Built for Baby Food

Safety-First Design for Infant Nutrition

Pharma-Grade Hygiene

Full 304 stainless steel with electropolished product-contact surfaces. CIP system cleans to dairy-grade standards. Tool-free disassembly for visual inspection.

Allergen Changeover Protocol

Complete strip-down and CIP wash between allergen groups. PLC prompts operator through validated changeover steps to prevent cross-contamination.

Batch Traceability

PLC logs batch number, fill weights, seal integrity, and timestamp for every production run. Exportable data supports HACCP and regulatory audit trails.

Gentle Purée Handling

Servo piston fills smooth purées and chunky textured meals without air incorporation. Consistent fill weights ±0.5% meet the tight tolerances required for infant portion sizes.

Specifications

SDH-R Configuration for Baby Food

Throughput30 cups/min (dry cycle)
Fill Range50g – 250g (2oz – 9oz)
Surfaces304 SS, electropolished
TraceabilityPLC batch logging
HygieneCIP, HACCP, allergen-safe
CertificationsCE, FDA, UL

Delivery & Service to Red Deer

Alberta customers have direct factory access at 4049 74 Ave SE, Calgary. Same-day spare parts, in-person training, factory visits, and on-site commissioning are standard. No freight charges for Calgary-area pickup.

Starting at $45,000 USD with a 12-month warranty. Made in Calgary, Alberta, Canada and shipped to Red Deer.
Hummus Pack HQ — 4049 74 Ave SE, Calgary
Direct factory access and same-day parts
Zero freight for local pickup
Visit our facility before purchasing
Baby Food Varieties

Baby Food Products We Fill for Red Deer Brands

Fruit purées
Vegetable purées
Mixed fruit & veg meals
Organic baby food
Stage 1 smooth purées
Stage 2 textured meals
Toddler snack cups
Baby yogurt
Baby cereal cups

How the SDH-R Fills Baby Food in Red Deer

Fully automatic process — no manual labour required

1

Cup Denesting

Empty cups are automatically separated from a nested stack and placed into the rotary table carriers. The pneumatic denester handles round, square, and rectangular cups from 2oz to 32oz — standard formats for baby food brands in Red Deer.

2

Servo-Driven Filling

The volumetric piston filler draws a precise dose of baby food and dispenses it into the cup. Servo control adjusts stroke length and speed per recipe, holding ±0.5% fill-weight accuracy across every run for Red Deer retail compliance.

3

Membrane Heat Sealing

Roll-stock film is drawn across the filled cup and heat-sealed to create a tamper-evident, airtight membrane. Temperature, pressure, and dwell time are individually controlled to match your specific film and cup material.

4

Snap-On Lid (Optional)

A pick-and-place mechanism applies a consumer-friendly snap-on lid over the membrane seal. This two-barrier system provides tamper evidence and reclosability — the standard expected by grocery retailers.

5

MAP Nitrogen Flush (Optional)

Modified Atmosphere Packaging replaces oxygen with food-grade nitrogen before sealing. For baby food, this extends refrigerated shelf life from 7–10 days to 30–45+ days — essential for distribution across Red Deer and beyond.

Compliance & Certifications: Every SDH-R machine ships with CE, FDA, and UL documentation. The 304 stainless-steel construction meets HACCP and BRCGS standards — ensuring your baby food packaging meets the regulatory requirements that Red Deer retailers and distributors demand.

Baby Food Filling Machines in Nearby Cities

We also supply baby food packaging lines across Alberta

Baby Food Filling Machine FAQs: Red Deer

How much does a baby food filling machine cost in Red Deer?

Baby food purée cup filling on the SDH-R starts at $45,000 USD for the single-filler configuration, for fresh and refrigerated products. Nitrogen MAP, additional fillers, labeling and variable data coding, and custom tooling raise the price. Send your purée type, cup size, target speed and options, and the team replies with a quote within about 24 hours.

How is the SDH-R delivered and serviced in Red Deer?

The SDH-R is built in Calgary, a straight run up Highway 2 from Red Deer, and delivered 8-12 weeks after order confirmation. Support comes from our Calgary headquarters and Alberta service centre. A 12-month warranty applies, and quote requests get a reply in about 24 hours.

Need a Baby Food Filling Machine in Red Deer?

Get a personalized SDH-R quote for baby food packaging in Red Deer. From $45,000 USD with a 12-month warranty and dedicated service support.